GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Johnson55 on November 18, 2019, 01:56:45 PM
-
Nothing new here. I just got my hands on a Veradium Air tuned Hatsan AT44-10 in .25. I will post a review of the rifle soon. I am dialing it in as they say. It is one sweet shooter. I love the magazines, however, wanted to try the clothes pin as I really enjoy single shot style shooting also.
I watched the yourtube video of the process and got out my file and started removing a little material at a time. Then I finally got it where it works like a charm. It is a process that I can do from my chair at the shooting table and load the rifle from behind with the pellet resting in the single shot tray. I took some pics to illustrate the process. I made it so you can keep the magazine "bolt" back and just slide the tray under it and inside the magazine area when the rifle is cocked. Works great.
-
Simple, yet effective. I like it!
-
This is the first time I’ve seen this idea, I have a hatsan at-44 in .25 and clothes pins, I will be adding this to my list of projects.
-
I did the same but also I glued a piece of fuel pipe to the peg so the pellet didn't drop , I made it to load the 33grn's that didn't fit in the .22 mag they wouldn't fit with the peg either …………...
-
Great idea - simple, effective, economical!
-
I did the same but also I glued a piece of fuel pipe to the peg so the pellet didn't drop , I made it to load the 33grn's that didn't fit in the .22 mag they wouldn't fit with the peg either …………...
could u post a picture of that?