GTA

Airguns by Make and Model => Crosman Airguns => Topic started by: Psipumper on November 15, 2019, 10:03:07 AM

Title: 1377 bolt handle attachment
Post by: Psipumper on November 15, 2019, 10:03:07 AM

I have a new model 1377. I removed the bolt assembly . I tried to remove the handle but it broke off. Is it threaded or pressed in? I heated it up prior but it broke flush and I need to get the broken part out.

Title: Re: 1377 bolt handle attachment
Post by: Tom Tucker on November 15, 2019, 10:11:03 AM

It looks pressed in to me.  I don't think it's intended to be removable.

I suppose you could put the bolt in a vise and try to drive out the broken piece with a mallet and a pin punch... or drill it out.

Title: Re: 1377 bolt handle attachment
Post by: CraigH on November 15, 2019, 10:17:13 AM

The factory bolt/probe and bolt handle are pressed together.   There are no threads.    I assume you have the plastic breech off the gun and have removed the metal retainer from the bottom of the breech.   Any Crosman or aftermarket threaded bolt/probe and bolt handle can replace the pressed together version.

Title: Re: 1377 bolt handle attachment
Post by: Psipumper on November 15, 2019, 12:03:30 PM

Thanks. I messed up thinking it was threaded. Now I can knock out the broken part. I am extending the bolt length 3/32 to seat the pellet past the transfer port. That is why I needed to remove the handle.
Charles

Title: Re: 1377 bolt handle attachment
Post by: SwampHunter on November 15, 2019, 12:47:29 PM

I can send you one of the threaded bolts an handle if you need it?

Title: Re: 1377 bolt handle attachment
Post by: BillK on November 16, 2019, 01:37:09 AM

Or you can pick one up here.  https://mellonair.myfreesites.net/177-22-bolts