GTA
All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Share Your Simple Home Projects (TRICKS-N-TIPS) => Topic started by: Lt. Dan on November 04, 2019, 08:40:10 AM
-
I'm running out of room for my "stuff" so I decided to build a custom under the bed out of the way storage box. It's 35" x 55" inside dimensions and 5" over all height.
I bought a 72" x 80" moving blanket from Harbor Freight which I cut in half, surging and sewing the cut edges. I will place one half in the bottom and cover the items with the other half. This will keep the dust bunnies from gathering on my stuff. Totat cost $60.
-
Very nice, and a good place for "stuff"! ;D
-
I like it!! Thanks for sharing. A bill of materials would have been nice but I think I can figure one out from your pics.
-
I like it!! Thanks for sharing. A bill of materials would have been nice but I think I can figure one out from your pics.
Sorry, didn't cross my mind to list materials
(4) 1 1/2" swivel casters from Harbor Freight $1.99 ea = $7.96
(2) 1x6x10 white pine boards from Lowe's $11 ea
(1) 3/8" 4x8 sheet Lauan plywood from Lowe's $26
I had the pan head screws for the wheels took (16) No. 10 - 3/4"
I used my pneumatic finishing nail gun and I had the 18 ga x 2" nails for joining the boards and 3/4" staples for the plywood.
I used the wood glue I had on hand.
I had some Minwax water based sealer, two coats.