GTA
Airguns by Make and Model => Feinwerkbau => Topic started by: FWB-Springer124 on October 29, 2019, 05:11:09 PM
-
Any one own or have rebuilds a FWB-127 .22 cal.? Look for a guide to work off of. need about the fps and weigh type of pellet used. blue book listed it 600+ in .22 . need real world numbers.
any info. on your Rebuild? I have used A.R.H. twister SPRINGS , piston sleeve steel top hats with Mongoose piston seals on my 2 124's .177 is doing 887 with IMI ELEY MATCH 7.5 GR. WAD CUTTERS.
THANKS
SPRINGER
-
JMO, I had a 124D .177cal some yrs back, that aved 806fps w/7.9gn crosman pellets, I'm also 1k feet+ above sea level, I'm going to give a comparison between 127 and an HW50s in .22cal, these are the only real world #s I can offer u! my 50 with a 16gn AA field aves 605fps, with a RWS Super H-Point 14.2gn it aves 625fps, I hope this helps ;D
-
Thanks mark , just made removal pins for cocking lever for my
FWB- 124 & Fwb-127 . Punch out pins 3/32 drill & 3/10 metric hex head screws.
Aloha springer.
-
Nice work on the pin! The 127 is one of a few rifles that I still want. Please post more as your work progresses. I'm betting that you can get into 700 fps with a standard weight .22 pellet. I know that the regular 124 can shoot a wide range of velocities depending on the condition of the tube and the tune up and elevation of course. My 124 was tuned for smoothness (at my request) and is getting around 830 with 7.3 grain pellets, so your tune is sounding a bit faster yet. Sorry, no important .22 data here, but good luck!
Vs
-
Mark , you might luck out , the FWB-127 Customs super might need to go to a home where it can help out some critters . I'm in Hawaii , it's like California with out the needles & @$%^ everywhere. since I moved from Mississippi , I haven't been controlling that much live pests. doing a soft tune with rubber to reduce vibration and the need for artillery hold. I have to read about how this site wants members to trade. I'm still a newbie to blogs .