GTA

Airguns by Make and Model => Daisy Airguns => Topic started by: birdmove on August 25, 2019, 07:16:58 PM

Title: 880 question
Post by: birdmove on August 25, 2019, 07:16:58 PM

    My 880 pump handle likes to pop back out instead of staying latched. I believe I had read it may be a bad pump head seal. If I remove the pump handle assembly, a piston with several seals and a foam wiper are attached, is the seal in question part of that assembly?

Title: Re: 880 question
Post by: Rob M on August 25, 2019, 07:25:32 PM

its the rubber bushing behind the piston.. they degrade over time

Title: Re: 880 question
Post by: Ronno6 on August 26, 2019, 12:07:38 AM

Those are 50 cents from Daisy...........considerably more on ebay....

Title: Re: 880 question
Post by: birdmove on August 26, 2019, 03:10:14 AM

    Yeah, I emailed Daisy today.

Title: Re: 880 question
Post by: Ronno6 on August 26, 2019, 09:28:39 AM

Easiest to install using a 6" bench vise, as that "elastomer spring" requires a goodly amount of force to compress....