GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Luscombe on August 17, 2019, 01:31:11 AM

Title: DIY Walnut Stock - Liberty and fx DreamPup
Post by: Luscombe on August 17, 2019, 01:31:11 AM

Many Thanks to Stephen aka the banker4 for sharing his liberty stock tracings with me. He traced 3 different profiles of stocks for his Liberties and then carved stocks for them. I wanted to do the same for my Liberty so I asked Stephen if he would share his tracings. I used our large scanner at work to turn them into a PDF.

I have a Liberty and an FX DreamPup. Also want a walnut stock on the DreamPup so I traced its' profile and scanned it to a PDF too.

Now the best part. I contacted American Walnut Co. (Alan) in St Joseph MO and they will sell stock blanks at about $55 each plus tax and shipping.
My son is lives in Kansas City so he is going to pick mine up. I will share photos when I get them.


For those of you that would like to carve your own stock, please find attached the pdf file for the (3) Liberty stock tracings and the DreamPup.

Title: Re: DIY Walnut Stock - Liberty and fx DreamPup
Post by: AVS Stephen on August 18, 2019, 10:06:52 AM

Hey Gary, thank you doing that. I'm going to try another one.