GTA
All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Topic started by: SpeedyHelium on June 08, 2019, 05:20:59 PM
-
Hello folks!
I recently got an Artemis P12 to noodle around with.
So I did.
Made up a spring guide for the valve return spring 3d printed some K baffles to fill the shroud and cleaned everything up.
Also did some modifications as suggested by Wingman NZ in his wonderful review of the SPA P12. (dimpled the bolt so it locks closed, added a preloadable oring to the valve stem to prevent blowback into the action)
Hope you guys like the pictures so far, more to come!