GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: geoff1987 on May 20, 2019, 12:59:45 PM

Title: AGT Vulcan 2 .25 power tuning
Post by: geoff1987 on May 20, 2019, 12:59:45 PM

Hi all,

Has anyone pushed a .25 Vulcan 2 to shoot 33.95g JSB's at 930fps+, if so what reg pressure did you use and did you replace the hammer spring? Also if there is anyone with a .30 Vulcan 2 with the ability to measure the hammer spring please let me know the dimensions.

Currently I have managed 900fps with a reg adjustment. The reason I want these speeds is I will move to 34g slugs shortly and have seen good results at between 930-950fps. Shot count is not a huge issue but 20-25 shots would be nice out of a 250bar fill.

Any advice on hammer spring size, valve spring size and porting adjustment would be great. I also have a Huma reg on order factory set to 155bar but can adjust on arrival.

Cheers

Geoff

Title: Re: AGT Vulcan 2 .25 power tuning
Post by: geoff1987 on May 24, 2019, 02:28:08 AM

Hi again,

Has nobody out there tuned their Vulcan 2? Maybe its just that good nobody wants to.

Have a great weekend all!!

Title: Re: AGT Vulcan 2 .25 power tuning
Post by: darkcharisma on May 24, 2019, 04:40:44 AM

if you have managed 900fps with reg adjustment alone. you can certainly push the 34 grains towards 930fps. i dont have that particular gun but the tuning is similar across airguns. ya need to try upping the spring tension or weight. next step is to bore the transfer ports to 80% of the caliber. that should be enough to get it up there.