GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Backyard_plinker on May 14, 2019, 12:37:50 PM
-
I just got off the phone with Ty at ATI and he said they have a small quantity of no warranty, returned Liberty’s for sale, still $100 each. Mine is being replaced under warranty and I couldn’t resist rolling the dice and picking up a “parts” gun. Should be shipping in a few day!
-
Not doubting your word but, are you sure he said Liberty and not the .22 Freedom?
I thought the Libertys were all gone.
-
Not doubting your word but, are you sure he said Liberty and not the .22 Freedom?
I thought the Libertys were all gone.
He was very specific; Nova Liberty with wood stock in .22 cal shipped to NH $110.00. I would guess there stock of returns is inconsistent flux??? Please don’t take my word on it, give them a call!
-
I just talked with Ty. It was Libertys. All wood stocked ones are gone. They have a few syn 22 cals left. One less now. ;)
-
Well there ya go... I guess they will sell them as they come in.
Good deal.
-
Yeah ya greedy people! Called up to get one of the Libertys in wood and they sold 8 of them just that quick.
-
I will be experiening "shooting Freedom" in my future (if I can get it working). Still had 2 liberty.
-
I think that if I got another Liberty I'd go for a warranty one with the HARDAIR code, then you get everything with it. I need another gun like a hole in the head though.
-
C'mon Wayne... there's always room in the head for one more hole.
-
I’m going to try to resist getting another airgun, although it will be difficult.
-
I said that a week ago.... the Brown Truck dropped 2 off today.
-
By golly Bill then they weren't ATI's because they ship Fedex ???
-
Nope, a pair of his and hers Maximus'.
-
I need another gun like a hole in the head though.
Goes without saying. ;)
I resisted all those Freedoms, but the Liberty has more value for me. This one will probably be a project gun, maybe 25 cal. Worse case, it is a parts gun for the other two.
-
I like them both about the same John, they both have their advantages.
-
By golly Bill then they weren't ATI's because they ship Fedex ???
The Fed ex that delivers to my house is yellow!
-
Received my Freedom(s) today. Both have pump issues with one retaining up to 2.5k psi (shot 880 fps with 14.3gr) and the other pumps a little then it leaks (slight barrel hissing). Hopefully I can pull them apart and it will be something easy. This is a little more complicated than my 1322 so Ill be reading some posts on these issues. Anyone have an oring list?
Grateful that they are complete and even have single shot trays, an allen wrench and one fill probe.
-
My 2nd non-warrentee Liberty is due to arrive today.
-
2nd Liberty parts gun arrived! :)
This one has both mags, fill probe, spare O-rings , allen wrench, manual, front and rear sights. :)
Box slighly abused.
Gauge on 0 psi.
No repair/issue statement like my 1st non-warrentee Liberty. Just the ATI disclaimer.
PS: The SS tray was included, as well.
This plastic stock is significantly lighter than the wood, but the ergonomics not quite as good.
-
Anyone know the size of a probe o ring for a .177 and where to get it ...
-
https://drive.google.com/drive/folders/1_Wv4mkAVJt_ZSP6MXaHSn3P5UtBilHsq?usp=sharing (https://drive.google.com/drive/folders/1_Wv4mkAVJt_ZSP6MXaHSn3P5UtBilHsq?usp=sharing)
drawing says dash-004 for 22 cal and dash-001 for 177cal
suggest https://www.mcmaster.com/o-rings (https://www.mcmaster.com/o-rings)
The dash-001 (0.109" OD) seems too small to me, but I only have access to the 22 cal rifle and it has the dash-004 o-rings.
***edit.. I'd also order a bag of -002 (0.142" OD) and -003 (0.176" OD) just in case the drawing has an error***
If you place an order with McMaster-Carr, I suggest you get SEVERAL sizes from the parts list AND a few optional ones that may come in handy.
At ~$2.00/100 - $3.00/100, it is cheap and easy to have spares and variety.
-
FWIW: Most, if not all, of the Liberty metric O-rings in the parts list are CS X OD, but the standard is CS X ID. You just have to do the calculations.
-
Another FWIW. I've been running 004 90 cast urethane on the 22. I dont see them giving up the ghost any time in the near future.
-
Looking for the actual dimensions is a pia .. I am going to try to measure them but no calipers..
-
What to do in the meantime..
-
What to do in the meantime..
Nicely done.
-
Thanks !!