GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Wood Chop Shop (Working with wood) => Topic started by: guero_gordo on April 19, 2019, 01:31:16 AM

Title: CA for wood finish
Post by: guero_gordo on April 19, 2019, 01:31:16 AM

Stumbled across this. Never though of using CA as a finish, but since he mentioned high wear and waterproofing I thought of stocks:

https://www.canadianwoodworking.com/tipstechniques/finishing-ca-glue (https://www.canadianwoodworking.com/tipstechniques/finishing-ca-glue)

Title: Re: CA for wood finish
Post by: TooJung2Die on April 19, 2019, 07:03:37 AM

Quote from: guero_gordo on April 19, 2019, 01:31:16 AM

Never though of using CA as a finish, but since he mentioned high wear and waterproofing I thought of stocks:

It works very well on small turned wood objects. I have a friend that turns custom exotic wood pens. I have an example he made and finished with CA glue. It is beautiful. It probably would be hard to apply on something as large as a stock. Expensive too.