GTA

All Springer/NP/PCP Air Gun Discussion General => Projectiles => Boolit and Pellet Casting => Topic started by: avolluz on April 05, 2019, 12:04:22 PM

Title: AF Escape .25 Slug Casting
Post by: avolluz on April 05, 2019, 12:04:22 PM

Has anyone casted slugs for the .25 AF Escape? If so, can you share the mold you used? If you haven’t casted, what slugs are you getting the best accuracy from in this gun? The barrel is a choked, 24” LW. I know the theory of choked barrels and slugs, so please just share real world experience. Thank you in advance. Gun is on its way so I’m just trying to build my testing supply of ammo before it gets here. I already have an assortment of pellets, just looking for slugs.

Title: Re: AF Escape .25 Slug Casting
Post by: KnifeMaker on April 08, 2019, 12:06:15 PM

Lots of info in this section. the AF uses the same L/W barrel that most of use. MIne are unchoked, however, once you get the gun, push a pellet thru, and mic the choke Dia. Size to thi or very slightly over. No more than three ten thousandths.  ;) 


If you are not going to cast yourself, tell Nick of NSA or D- Rig on Ebay and here by PM what the measurement is.  8)


Knife