GTA
Support Equipment For PCP/HPA/CO2 and springers ,rams => Support Equipment For PCP/HPA/CO2 => Topic started by: redlined_b16a on December 29, 2018, 10:10:58 PM
-
https://www.ebay.com/itm/PCP-Air-Filter-Compressor-Oil-water-Separator-High-Pressure-40Mpa-4500psi-Pump-/352498656769?txnId=1016205129022#vi__app-cvip-panel (https://www.ebay.com/itm/PCP-Air-Filter-Compressor-Oil-water-Separator-High-Pressure-40Mpa-4500psi-Pump-/352498656769?txnId=1016205129022#vi__app-cvip-panel)
Came with extra elements and seals and a micro bore hose.
Male and female quick disconnects installed.
They fit my Air Venturi Foster perfectly.
Pressure tested to 3000 psi with no leaks.
$29 shipped I'm impressed.
Hope it catches oil atleast.
Very well made.
-
The inside is filled with what looks like charcoal and dessicant beads and a couple layers of felt.
-
I got one, heck of a deal ;D
-
Pretty cheap, I think I gonna get one as a first stage to catch oil before the big gold filter
-
I added one of those to my Nomad II as a desiccant filter. The low flow of the Nomad II makes this a good choice. For a larger compressor, filling tanks, it probably wouldn't have enough capacity by itself, but would make a great pre filter, to catch water and oil, before a big gold desiccant filter.
A word of caution about these smaller black ones. Mine came set as tampon-charcoal-tampon. The charcoal came mixed with little white calcium chloride beads, that turn into a slimy, corrosive liquid if they get too wet. I replaced the charcoal in mine with indicating silica gel beads and set it up as, 1/2 tampon-silica gel-1/2 tampon. This gives me a bit more room for desiccant.
-
I bought mine for a desiccant filter for my F10 Shoebox mainly to keep water out of my tanks. I'll need to buy me some more desiccant beads too because I'll be running it with the beads only.
-
Thanks for the tips.
I plan on dessicant beads