GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Wheelman on December 20, 2018, 12:19:45 AM
-
I'm considering buying a Stormrider and right now PA has a deal on .177 caliber gen1 models for $129.99.
I'm wondering if it's possible to convert a .177 version to .22 caliber and what parts would be required?
I see it's possible to purchase a .22 barrel from PA but the only .22 breach shown as available is for left handed, is a right hand available and from where?
Aside from the breach and barrel what other parts would be required to complete the conversion, assuming it's possible.
Thanks
Wheelman
-
LOL, and I'm looking to convert my MRodAir Varmint (same airgun) from .22 to .177 in the near future.
From everything I gather, you need just a bolt, receiver, and barrel. However, it's also a good time to plan on getting a different bolt-handle since they do break (ask how I know), as well as spending time cleaning up the breech and crown and inspecting/replacing O-rings.
Julie at SPA airguns will sell you the parts you need with the exception of barrels- courtesy slowboat from China. Since PA sells barrels, it's almost a non-issue. Bottom line is this platform can be a multi-caliber workhorse without blowing a big wad of cash.
At $129, should just buy a .177 complete ::)
-
PA must've seen me coming, the price has been raised to $169.99. :(
Guess I'll keep pondering the idea, who knows maybe after Christmas they'll be back on sale and I can get one at a lower price.
It is good to know my idea isn't totally off base though. :)
Wheelman
-
I would love to see the specs for the turned down end of a Qb 78 14mm and Qb 79 15mm barrel... I think they are ~21" long...
I have seen they are turned down and oringed for the breech similar to the Storm... just do not know the specifics...
do know that the storms 12mm barrel is a bit thin walled at only about .126 in .22... even a 14mm barrel will be much stiffer...
My thoughts as a .22 with the small air tank I would sleeve a Maximus 26" barrel to at least .5" and mod it for the breech...will help power or shot count a bit depending on how you tune...
Bill found the XS 60c barrel bands fit the air tube... those barrels are supposed to be 15mm... so custom barrel bands for cheap...
reply 96 in below thread...
https://www.gatewaytoairguns.org/GTA/index.php?topic=129471.80 (https://www.gatewaytoairguns.org/GTA/index.php?topic=129471.80)