GTA
Support Equipment For PCP/HPA/CO2 and springers ,rams => Support Equipment For PCP/HPA/CO2 => Topic started by: Spark Master on November 04, 2018, 09:38:27 AM
-
I may be able to get , free, a scuba tank not used in 15 years. I believe they are stamped for time/length of service, like a propane tank, is it worth it? How does one get it recertified?
It may be gone before I get a reply but I had to ask. Thanks
-
It'll need Hydro tested.
Any dive shop would know where to do it, maybe even your local welding gas supplier or Fire Station can assist.
about $20-30 and good for 5 years if it passes.
I say snag it... price is right.
-
It'll need Hydro tested.
Any dive shop would know where to do it, maybe even your local welding gas supplier or Fire Station can assist.
about $20-30 and good for 5 years if it passes.
I say snag it... price is right.
I will get them either later today or tomorrow.
-
You need to make sure that it's at least a 3000psi tank. A 2640psi tank won't really give you much in the line of fills, even on a 2000psi gun like the Maximus. If you have a 3000psi gun, a scuba tank might not be your best choice.
-
To visually inspect and hydrostatic test a scuba is $65 to $80 in the Dallas area. Still that's pretty cheap. You still need the yoke and fill hose with the probe for your rifle.
Note that it may not pass, also note that some models cannot be recertified.
You still need a yoke and fill hose, and probe / adapter for your rifle.
-
To visually inspect and hydrostatic test a scuba is $65 to $80 in the Dallas area. Still that's pretty cheap. You still need the yoke and fill hose with the probe for your rifle.
Note that it may not pass, also note that some models cannot be recertified.
You still need a yoke and fill hose, and probe / adapter for your rifle.
the whole thing fell through...so no tanks.
But "Tanks" for the replies to you one and all.
-
There is a post in the bargain gate about the Benjamin 90 cubic inch tank, its usually $400, now on sale for $309.
« previous next »
REPLYNOTIFYMARK UNREADPRINT
Pages: [1] Go Down Share This!
Author Topic: Benjamin 90 Cubic Inch Charging System (Read 185 times)
Rate Topic:
)
truckReal Name: Barry
Benjamin 90 Cubic Inch Charging System
« on: October 31, 2018, 10:19:52 AM »
Quote
Amazon has a good price on it.
https://www.amazon.com/gp/product/B00AF61IL4