GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Shovels on November 02, 2018, 06:18:51 PM

Title: Looking for large gen 1 mrod transfer port
Post by: Shovels on November 02, 2018, 06:18:51 PM

Looking for a large gen 1 mrod transfer port .. let me know what you got or where to look

Title: Re: Looking for large gen 1 mrod transfer port
Post by: Motorhead on November 02, 2018, 08:42:10 PM

Tim Hill ... Ebay

Title: Re: Looking for large gen 1 mrod transfer port
Post by: FuzzyGrub on November 02, 2018, 09:33:10 PM

FWIW: Gen 2 TP is same as Gen 1.  JSAR also has 0.187" poly TPs. 

Title: Re: Looking for large gen 1 mrod transfer port
Post by: mann on November 02, 2018, 11:41:13 PM

Go to hardware store and get some poly tubing the id is like .170

Title: Re: Looking for large gen 1 mrod transfer port
Post by: screwwork on November 03, 2018, 12:42:42 AM

Quote from: mann on November 02, 2018, 11:41:13 PM

Go to hardware store and get some poly tubing the id is like .170

+1
.187 isn't really large though poly tubing is what Travis has used for years, I use it as well without any issues.
Cut it to lenght, heat it up and place over .2 dia drill if possible to cause it to get a larger OD and press it in to fit. Seals great that way too.