GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: unerstile on September 20, 2018, 11:30:40 AM
-
Hello, i have an AR6 Evanix and im interested in switching the barrel, is that possible? any sudjestions?
Thanks
-
Switch it to what? Someone from the PCP gate might have replaced it. Moved your post there. The American/Chinese/Korean gates are for Springers only.
Good luck.
Harry
-
Why do you want to switch it?
-
Yes, knowing what you are trying to accomplish would help here. ;)
Knife
-
Getting a bew barrel on an AR6 would be a piece of cake since there's no transfer port nor O-ring,
just need to turn any barrel blank to fit the reciever,... that reminds me, I want a .25 and .30 AR6 badly :) :)
-
Getting a bew barrel on an AR6 would be a piece of cake since there's no transfer port nor O-ring,
just need to turn any barrel blank to fit the reciever,... that reminds me, I want a .25 and .30 AR6 badly :) :)
The barrel is threaded in to the breech (quite rare in airguns) so you need someone with a lathe to make it fit.
-
Getting a bew barrel on an AR6 would be a piece of cake since there's no transfer port nor O-ring,
just need to turn any barrel blank to fit the reciever,... that reminds me, I want a .25 and .30 AR6 badly :) :)
The barrel is threaded in to the breech (quite rare in airguns) so you need someone with a lathe to make it fit.
Well yeah, need it to turn the barrel down too,
best way to mount a barrel screwed into the reciever, the advantage of not having a transfer port.
-
I have an older AR-6 RIFLE .22, HAD A CROSMAN 24" barrel turned down to fit the receiver, grub screws holding it in, didn't work worth a darn, bought a new barrel from ARS, Davis might still have some parts available?