GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: PeruvianHunter on August 22, 2018, 07:23:23 PM

Title: Sidelever Breech for crosman AGs
Post by: PeruvianHunter on August 22, 2018, 07:23:23 PM
Today searching the net for some parts I found this sidelever breech for the m-rod made in Thailand:

(https://i.ebayimg.com/images/g/TZEAAOSwrLZbVt-8/s-l1600.jpg)

The URL: https://www.ebay.com/itm/Side-Lever-Breeches-Crosman-Benjamin-Marauder-magazine-Multi-shot-Airgun-Loader/283069932774?hash=item41e84864e6%3Am%3AmLmvmIHrG2x4h_PRD1cXeqQ&var=583467587042 (https://www.ebay.com/itm/Side-Lever-Breeches-Crosman-Benjamin-Marauder-magazine-Multi-shot-Airgun-Loader/283069932774?hash=item41e84864e6%3Am%3AmLmvmIHrG2x4h_PRD1cXeqQ&var=583467587042)

this breech costs $130 (the Russian version costs $259.99) and you can use a barrel 1/2" OD and a shroud of 25mm OD

it makes me want to give it a try

What do you think?
Title: Re: Sidelever Breech for M-ROD and other crosman AG
Post by: triggertreat on August 22, 2018, 07:31:19 PM
I would look at the description again.  I don't believe these are for the Mrods.
Title: Re: Sidelever Breech for crosman AG's
Post by: PeruvianHunter on August 22, 2018, 07:37:45 PM
Quote from: triggertreat on August 22, 2018, 07:31:19 PM
I would look at the description again.  I don't believe these are for the Mrods.

you're right man, I misread that page :(

I'm changing the title of this post
Title: Re: Sidelever Breech for crosman AGs
Post by: AaronMB on August 22, 2018, 09:48:12 PM
It sure is interesting; I've been eyeballing that thing, too.

If you haven't seen it, you might note this thread: https://www.gatewaytoairguns.org/GTA/index.php?topic=146187.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=146187.0)
Title: Re: Sidelever Breech for crosman AGs
Post by: mackeral5 on August 22, 2018, 10:23:50 PM
Too bad they don't make them for QB78's.  It's not very difficult to modify an OEM barrel to be compatible with a Mrod style repeater breech....
Title: Re: Sidelever Breech for crosman AGs
Post by: Canadianguy55 on August 23, 2018, 11:46:07 AM
If you scroll down to bottom of this page someone has been talking about there experience with these:)

https://www.gatewaytoairguns.org/GTA/index.php?topic=136688.40 (https://www.gatewaytoairguns.org/GTA/index.php?topic=136688.40)
Title: Re: Sidelever Breech for crosman AGs
Post by: PeruvianHunter on August 23, 2018, 01:56:15 PM
Quote from: Skateboarddude on August 23, 2018, 11:46:07 AM
If you scroll down to bottom of this page someone has been talking about there experience with these:)

https://www.gatewaytoairguns.org/GTA/index.php?topic=136688.40 (https://www.gatewaytoairguns.org/GTA/index.php?topic=136688.40)

Thanks for the info I'll check that right now