GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Missed-Em on August 19, 2018, 09:42:14 AM
-
My Urban probe will fill the cylinder but leaks around the probe as it fills. Have replaced both O-rings and still the problem. So, what are the possible causes/solutions? I can't find the correct O-ring sizes, anyone have it? While I'm asking all these questions, how about a location for an Urban schematic?
Thanks - Steve
-
Mine always has seeped just a little. I can hear a faint whistle as I fill. I still manage to get it full everytime and I have a compressor so I don't sweat it much. Would be nice to find a foster conversion tho.
-
A couple wraps of teflon tape inside the o-ring groves may give a better seal, if o-rings are not fully seating. It worked for me in a pinch.
-
Here are the orings : http://www.airgunspares.com/store/product/16110/BSA-BSA-Buccaneer-Probe-O-Ring-Part-No.-16-9048/ (http://www.airgunspares.com/store/product/16110/BSA-BSA-Buccaneer-Probe-O-Ring-Part-No.-16-9048/)
You should a light coat of Molykote grease on them :
http://www.airgunspares.com/store/product/12807/BSA-Molykote-Grease-Sachet/ (http://www.airgunspares.com/store/product/12807/BSA-Molykote-Grease-Sachet/)
-
Schematic
-
Thanks for that Mike.
-
Sorry, but I must have slept thru the Urban 101 class. I believe the Phox is the Brit version of the Urban, but how does the Coyote, et. al. fit in?
-
Phox Urban, Chacal, Coyote, BSA Buccaneer, essentially the same internals
-
You can see the similarities here, thanks to Marc In Iowa
https://www.gatewaytoairguns.org/GTA/index.php?topic=136008.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=136008.0)
-
Thanks Mike.