GTA

Airguns by Make and Model => Diana Airguns => Topic started by: rash_powder on June 28, 2011, 11:17:22 AM

Title: trigger adjustments
Post by: rash_powder on June 28, 2011, 11:17:22 AM

I adjusted the trigger pull on my 350 with the T05 yesterday.  The adjustment screw was bottomed out, and though it was working fine I thought I could make it better.  So I turned it out one turn.  The trigger did get much lighter, I like it this way now.  But my point of impact seems to have moved up about an inch.  Is this supposed to happen with a trigger adjustment?

Title: Re: trigger adjustments
Post by: Mark 611 on June 28, 2011, 03:33:25 PM

What do you mean moved up an inch? :P

Title: Re: trigger adjustments
Post by: rash_powder on June 28, 2011, 08:33:14 PM

Quote from: Mark 611 on June 28, 2011, 03:33:25 PM

What do you mean moved up an inch? :P

Keeping the same point of aim, my point of impact is now about 1" higher than before I adjusted the trigger.

Title: Re: trigger adjustments
Post by: Mark 611 on June 28, 2011, 09:54:43 PM

thats common when you lightn a trigger pull your finger isan't putting as much down ward pressure and pulling the rifle down ward and therefore you poi will change! :P

Title: Re: trigger adjustments
Post by: rash_powder on June 29, 2011, 12:02:26 AM

That is what I was thinking, too.  Just wanted to be sure.