GTA
All Springer/NP/PCP Air Gun Discussion General => Air Gun Gate => Topic started by: Relentless Holiday on July 17, 2018, 02:18:29 PM
-
I was on Ebay looking for a simple flat aftermarket rail to screw into the top of a gun reciever. Couldn't find a thing?!?!!?
My search ended at: "11mm rail -riser -rings -weaver -round -20mm -picatinny -ring -adapter -30mm" I was just eliminating bad hits. I can usually pin down what i am looking for but what the heck am I missing????
Tried "scope rail 11mm" as my starting point.
I must be in the depths of a major brain fart. I can't believe they have nothing to screw onto a flat receiver.. found a few round bottom ones, but nothing just flat.
Any suggestions would be appreciated, I feel pretty dumb just now.
-
Are you thinking of something like pictured on the linked site?
https://warnescopemounts.com/mountain-tech/
-
try searching ruger dovetail mount...those might work for you
-
I tried ebay too with :
11mm scope rail bottom
not specifying round or flat... and they were all round.
so, not a brain fart.
Mike
-
Are you thinking of something like pictured on the linked site?
https://warnescopemounts.com/mountain-tech/
YEP Liz. flat plain metal but in 11mm. I like going thru fleabay...many problems have been corrected thru their system for me.
-
try searching ruger dovetail mount...those might work for you
I tried ebay too with :
11mm scope rail bottom
not specifying round or flat... and they were all round.
so, not a brain fart.
Mike
OK Thanks, Whew.... thought I may have been missing sumthin' obvious, guess not.... gonna have to ck midway or somewhere else.
-
Something like this?
https://www.ebay.com/itm/11mm-Dovetail-Extension-to-20mm-Weaver-Picatinny-Adapter-Riser-Rail-Mount-Base/142049419811?epid=912493308&hash=item2112ce2223%3Ag%3ANRgAAOSwCp5XgGAU%3Asc%3AUSPSFirstClass%2198807%21US%21-1&_sacat=0&_nkw=11mm+to+20mm+rail+adapter&_from=R40&rt=nc&_trksid=p2380057.m570.l1311.R3.TR11.TRC1.A0.H0.X11mm+.TRS0 (https://www.ebay.com/itm/11mm-Dovetail-Extension-to-20mm-Weaver-Picatinny-Adapter-Riser-Rail-Mount-Base/142049419811?epid=912493308&hash=item2112ce2223%3Ag%3ANRgAAOSwCp5XgGAU%3Asc%3AUSPSFirstClass%2198807%21US%21-1&_sacat=0&_nkw=11mm+to+20mm+rail+adapter&_from=R40&rt=nc&_trksid=p2380057.m570.l1311.R3.TR11.TRC1.A0.H0.X11mm+.TRS0)
-
I think trying '11mm dovetail mount' or 'rimfire' scope rail/mount might help.
-
Here - https://leapers.com/index.php?act=listproduct&midx=1547&allids=1513_1547&svroot=MOUNTING SYSTEMS
-
I stand confused. Do you wish to convert an existing dovetail rail to a Weaver or Picatinny rail?
Or do you wish a plain Weaver rail to screw directly to a gun which has no scope mount?
Either is a common item but obviously not the same item.
-
from what you are describing im guessing you mean something like this??
-
from what you are describing im guessing you mean something like this??
Could be..A Ruger 10/22 rail might work but I believe it is a Weaver design and the base is somewhat concave in shape. 5th