GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: sticksquad on July 17, 2018, 11:25:23 AM

Title: Diana Outlaw .22 - Leaking
Post by: sticksquad on July 17, 2018, 11:25:23 AM

hi guys,

do you have any experience how to open this type of air tank ? do i need to take out the gauge meter first?
mine is leaking from charging place. here is the video and diagram.


https://www.dropbox.com/s/1r8z9whej0jmto8/leaking.mp4?dl=0 (https://www.dropbox.com/s/1r8z9whej0jmto8/leaking.mp4?dl=0)

https://spares.bagnallandkirkwood.co.uk/wp-content/uploads/2018/02/SPA6-Diagram-Schematics.pdf (https://spares.bagnallandkirkwood.co.uk/wp-content/uploads/2018/02/SPA6-Diagram-Schematics.pdf)

thanks in advance

Title: Re: Diana Outlaw .22 - Leaking
Post by: Tucobenedicto on July 17, 2018, 01:20:22 PM

It seems to remove the fill port cover you must remove the gauge,after this you probably can access to flats or holes and unscrew the cap and access to the check valve (45 and 46) o ring and screw. Bad oring or dirt-debris in the check valve zone can cause a leak thru the fill port.
Degass the tube first,of course.

Title: Re: Diana Outlaw .22 - Leaking
Post by: randy_68 on July 17, 2018, 01:28:14 PM

Here is an exploded view for you. These are very easy to work on and the extra orings you might need should have come with the gun along with the tool to remove the guage..  Just make sure it is empty of air and remove the guage,  barrel band and then unscrew the fill assy. There is a little screw with a small oring on it that seals the fill port. Might be bad oring or have dirt on it.  HTH

https://www.gatewaytoairguns.org/GTA/index.php?action=dlattach;topic=142105.0;attach=224393 (https://www.gatewaytoairguns.org/GTA/index.php?action=dlattach;topic=142105.0;attach=224393)

Title: Re: Diana Outlaw .22 - Leaking
Post by: Wayne52 on July 17, 2018, 02:08:27 PM

I've replaced a few of them o rings on both my SPA M16 and PP700SA, very easy to do.  Pretty common to have those go bad on most guns with a probe.

Title: Re: Diana Outlaw .22 - Leaking
Post by: sticksquad on July 17, 2018, 02:33:28 PM

Quote from: randy_68 on July 17, 2018, 01:28:14 PM

Here is an exploded view for you. These are very easy to work on and the extra orings you might need should have come with the gun along with the tool to remove the guage..  Just make sure it is empty of air and remove the guage,  barrel band and then unscrew the fill assy. There is a little screw with a small oring on it that seals the fill port. Might be bad oring or have dirt on it.  HTH

https://www.gatewaytoairguns.org/GTA/index.php?action=dlattach;topic=142105.0;attach=224393 (https://www.gatewaytoairguns.org/GTA/index.php?action=dlattach;topic=142105.0;attach=224393)

Quote from: Wayne52 on July 17, 2018, 02:08:27 PM

I've replaced a few of them o rings on both my SPA M16 and PP700SA, very easy to do.  Pretty common to have those go bad on most guns with a probe.

Quote from: Tucobenedicto on July 17, 2018, 01:20:22 PM

It seems to remove the fill port cover you must remove the gauge,after this you probably can access to flats or holes and unscrew the cap and access to the check valve (45 and 46) o ring and screw. Bad oring or dirt-debris in the check valve zone can cause a leak thru the fill port.
Degass the tube first,of course.

thanks guys.. will try it out  ;)

Title: Re: Diana Outlaw .22 - Leaking
Post by: jarmstrong on July 17, 2018, 03:45:37 PM

degas the rifle
unscrew fill port assembly as a unit ,I use a wooden dowel

now you can get to the inlet valve screw