GTA
GTA Airgunning Classifieds => Hobbyist Classifieds Gate => Hobbyist Classifieds Archive => Topic started by: a1rgunz on June 27, 2018, 09:09:59 AM
-
I have been 3d printing LDCs designed for lower end Crosman and Daisy air rifles. I am selling them for $18 shipped first class to U.S. addresses only. To install, be sure your air rifle is unloaded. Simply knock out your front sight assembly and replace with the custom LDC. Shine a light into the breech and look down the LDC to ensure the bore is concentric with the barrel. For maximum accuracy, apply a light touch of adhesive between the LDC adapter and the shroud.
(http://www.airgununiverse.net/wp/wp-content/uploads/2018/06/0620181826.jpg)
The LDC is only 4 inches long, yet it makes 10 pumps with the LDC sound like 3 pumps without.
These feature much tighter tolerances between the front sight assembly and outer barrel shroud as well as supporting a much longer section of the muzzle. This eliminates the need for the popular tape mod with the Daisy 880.
The Daisy model works for the 880, 901 and other similar models. Here's what it looks like on my 880:
(http://www.airgununiverse.net/wp/wp-content/uploads/2017/10/IMG_1660-e1530099924848.jpg)
The Crosman model works for the 2100, 1077, and many other air rifles that use front sight assembly part #66-201. Here's what it looks like on my 2100:
(http://www.airgununiverse.net/wp/wp-content/uploads/2018/06/0622181702a-1-e1530100090581.jpg)
The LDC ships in a freshly 3d printed finish that can be left as is, or you can custom finish it by sanding, wrapping with custom vinyl, painting, etc. I have a few of each model in stock ready to sell, so if you are interested, simply PM me, and I'll be glad to get one heading your way.