GTA

Airguns by Make and Model => Benjamin Airguns => Topic started by: bmoney on May 25, 2018, 05:57:45 PM

Title: 1322 Cheek riser
Post by: bmoney on May 25, 2018, 05:57:45 PM

I saw this on google images a while ago, well at least this is what it looked like.  I used 3/4 inch PVC, painted flat black, drilled the stock, then the PVC, counter sunk and used 1 1/2 inch wood screws.  It came out pretty good, I like that it is completely removable.  I was set up to use epoxy but scrapped that idea, sanded most of it off the stock and regrouped with the fasteners idea.  I may actually do a stick of half inch too just to try it out. 

Title: Re: 1322 Cheek riser
Post by: xtred1 on May 26, 2018, 01:00:36 AM

Does not look to bad.  How does it feel? 

Title: Re: 1322 Cheek riser
Post by: tennx on May 26, 2018, 11:08:49 AM

Clever....I like the foam pipe wrap on all 6 of my guns...good luck

Title: Re: 1322 Cheek riser
Post by: bmoney on May 26, 2018, 10:14:47 PM

It feels good, I think I may try some 1/2” PVC I have laying around.