GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Nomadic Pirate on May 21, 2018, 09:06:09 PM
-
I put my .25 back in the Tac stock and change the tune from the low fill 30-34 FPE to a 48-50 FPE with the 28gr Benjamin pellets,
I prefer the .25 into the Tac stock rather then the .30 bacause it's lighter and much shorter.
Total lenght 32.5" and it packs at 25"
with the Bugbuster it's a very light gun.
(http://i34.photobucket.com/albums/d124/NorthShoreLB/guns/DSCF0862_zps3z7xrthg.jpg) (http://s34.photobucket.com/user/NorthShoreLB/media/guns/DSCF0862_zps3z7xrthg.jpg.html)
(http://i34.photobucket.com/albums/d124/NorthShoreLB/guns/DSCF0863_zpsfjnhxjz1.jpg) (http://s34.photobucket.com/user/NorthShoreLB/media/guns/DSCF0863_zpsfjnhxjz1.jpg.html)
(http://i34.photobucket.com/albums/d124/NorthShoreLB/guns/DSCF0864_zpscpntsguz.jpg) (http://s34.photobucket.com/user/NorthShoreLB/media/guns/DSCF0864_zpscpntsguz.jpg.html)
(http://i34.photobucket.com/albums/d124/NorthShoreLB/guns/DSCF0865_zpsnksqz8vb.jpg) (http://s34.photobucket.com/user/NorthShoreLB/media/guns/DSCF0865_zpsnksqz8vb.jpg.html)
I decided to try a tune I never did before.
I got a Storm .357 Hammerspring, cut a few coils and put it in there, filled the gun to 220 BAR and shot 2 mags down to 150 BAR
this was the string with the Benjamin Dome 28gr pellets
1st mag
880
880
881
883
886
888
889
894
893
897
2nd mag
897
893
890
888
886
883
883
880
881
879
That's it,...not gonna tweek with this ;D ;D
Next time I get the Chrono out I will see what the 3rd mag prints
-
Very nice. Amazing that it is only 32.5" long. What is the barrel and shroud length?
-
Very nice. Amazing that it is only 32.5" long. What is the barrel and shroud length?
Barrel is the standard Evanix 17" barrel and the shroud is 16.5"
-
Kool gun! Dig the look! 👍🏽
-
That looks amazing!! Manny, would you happen to have a thread talking about how you mounted that stock? That's an ATI stock, right? For a 10/22 or a SKS?
-
That looks amazing!! Manny, would you happen to have a thread talking about how you mounted that stock? That's an ATI stock, right? For a 10/22 or a SKS?
it's for the 10/22, I think I have a build along on my Rainstorm II .30 Chronicles thread
-
That looks amazing!! Manny, would you happen to have a thread talking about how you mounted that stock? That's an ATI stock, right? For a 10/22 or a SKS?
it's for the 10/22, I think I have a build along on my Rainstorm II .30 Chronicles thread
Gonna check it out- thanks Manny!!
-
I'm almost picky but I'm absolutely loving this. Looks great.
-
I'm almost picky but I'm absolutely loving this. Looks great.
I love guns where the Shroud is the same lenght as the air tube, that's why I was asking you about the Winchester barrel ;)
-
Awesome Manny! Gonna have to get me a .357 spring now to play with! I have a few springs that work on this gun too, so easy to change a tune literally within 2-3 mins max! ;)
-
Awesome Manny! Gonna have to get me a .357 spring now to play with! I have a few springs that work on this gun too, so easy to change a tune literally within 2-3 mins max! ;)
Yep, that's what I like Jimmy,
Then I have all the different springs in ZipLocks with a note of FPE and fill pressure so in 2 minutes I can have a different gun, .......not as handy as a power wheel but not to bad :)
-
That looks awesome Manny. I bet that makes a nice light weight compact hunting package. Only thing I would do different is camo the stock to something like this one I did. Can't wait to start tuning on mine.
(http://i62.photobucket.com/albums/h81/randy_68/AR15/IMG_20170122_140223309_zpsxhmbuoyq.jpg)
-
That's a cool camo job indeed !!!!
I bang mine so much that I'm better off leaving it alone ( in the process of respraying my other Tactical stock for that reason :) :) )
It is indeed super light and compact, I can hold it by the grip and walk with my arm limp and it clears the ground by a bunch and I'm only 5'6" :)
-
That is an awesome carbine and a backpacker too. Very nice power and tune there bud!
-
Manny, is that a longer than usual airtube, or a shorter shroud? And if Shroud, what did you order.
Sure would bring the DonnyFl in a little closer! ;)
Knife
-
Manny, is that a longer than usual airtube, or a shorter shroud? And if Shroud, what did you order.
Sure would bring the DonnyFl in a little closer! ;)
Knife
I sent it to Neil to shorten and re-thread, I really like guns that have the shroud level with the AirTube,.......There's 1.25" left now between the end of the barrel and the end of the shroud, nice little CRACK this gun has in this configuration :)
-
Manny, if you have the time, could you pm me with the cost of this service from Saddle mountain?
Interested in the cost of his depinger as well.
Knife
-
Manny, if you have the time, could you pm me with the cost of this service from Saddle mountain?
Interested in the cost of his depinger as well.
Knife
It wasn't Will Piatt that cut the shroud,..... was Neil Clague.
I haven't bought a depinger in a long time from Will, I can't remember how much they cost, sorry
-
Manny, if you have the time, could you pm me with the cost of this service from Saddle mountain?
Interested in the cost of his depinger as well.
Knife
It wasn't Will Piatt that cut the shroud,..... was Neil Clague.
I haven't bought a depinger in a long time from Will, I can't remember how much they cost, sorry
I inquired about with Will and from his email he said $45 shipped for the de-pinger, its machined derlin with o-ring seal.