GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: krew808 on May 16, 2018, 10:15:48 PM

Title: Gamo Urban trigger screw
Post by: krew808 on May 16, 2018, 10:15:48 PM
Can anyone confirm if this is the right size? Thanks

https://www.ebay.com/itm/M2-5-x-8mm-Qty-10-DIN-912-SOCKET-HEAD-Cap-Screws-Stainless-Steel-A2-18-8/111922023074?hash=item1a0f128aa2:g:F2IAAOSwB4NWtsxL (https://www.ebay.com/itm/M2-5-x-8mm-Qty-10-DIN-912-SOCKET-HEAD-Cap-Screws-Stainless-Steel-A2-18-8/111922023074?hash=item1a0f128aa2:g:F2IAAOSwB4NWtsxL)
Title: Re: Gamo Urban trigger screw
Post by: MB on May 17, 2018, 12:44:57 AM
Screw M6x22 DIN 7985 TORX
Title: Re: Gamo Urban trigger screw
Post by: SpeedyBB on May 17, 2018, 12:58:13 AM
I very briefly had the Urban. Ordered the screws (couldn't order just one) in advance before I even had the gun, I did try one out though, and it worked beautifully. Got them from ebay, name is "Traxxas 1/16 Slash E-Revo Summit Head Screw 2.5x10mm".
Title: Re: Gamo Urban trigger screw
Post by: MaineJim1821 on May 17, 2018, 04:43:16 AM
I got the same size screw on my Urban and it works great.
You could use the 10mm length screw that would give you some adjustability but the 8mm works for me,screwed it all the way in and called it good.
Title: Re: Gamo Urban trigger screw
Post by: hollowpoint1911 on May 17, 2018, 05:35:48 AM
Quote from: MB on May 17, 2018, 12:44:57 AM
Screw M6x22 DIN 7985 TORX

The trigger adjustment screw is M2.5 x 8mm (ideally) or 10mm
Title: Re: Gamo Urban trigger screw
Post by: CraigH on May 17, 2018, 07:37:21 AM
I have used the 8mm length and the 10mm length.   The latter turned all the way in was a wee bit too long and the cocking had a bit of roughness.    I set it with a washer to 9.4mm - perfect.
Title: Re: Gamo Urban trigger screw
Post by: SpeedyBB on May 17, 2018, 12:52:53 PM
Yea, forgot to mention that. Can't have 10mm in all the way. I was planning on shortening the screw.
Title: Re: Gamo Urban trigger screw
Post by: krew808 on May 17, 2018, 04:10:58 PM
Thanks guys, so the threading is correct on this screw?
Title: Re: Gamo Urban trigger screw
Post by: MaineJim1821 on May 18, 2018, 05:12:01 AM
Yes it is correct.
Title: Re: Gamo Urban trigger screw
Post by: RAJOD on May 18, 2018, 06:37:05 AM
Quote from: krew808 on May 16, 2018, 10:15:48 PM
Can anyone confirm if this is the right size? Thanks

https://www.ebay.com/itm/M2-5-x-8mm-Qty-10-DIN-912-SOCKET-HEAD-Cap-Screws-Stainless-Steel-A2-18-8/111922023074?hash=item1a0f128aa2:g:F2IAAOSwB4NWtsxL (https://www.ebay.com/itm/M2-5-x-8mm-Qty-10-DIN-912-SOCKET-HEAD-Cap-Screws-Stainless-Steel-A2-18-8/111922023074?hash=item1a0f128aa2:g:F2IAAOSwB4NWtsxL)
why buy one for $4.00 when you can have 200 for not much more?

(http://puu.sh/AopPm/fa84509c80.jpg)