GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: ranchibi on May 16, 2018, 07:55:54 PM
-
Need some info/help with this pistols end cap removal. Contacted Mike he said use an M8 bolt with nut to remove the end cap then connect the LDC. Well, got the end cap and what looks to be and an air stripper with it! Does anyone know if the end cap is threaded or just a snug smooth fit? Thank you in advance! Purchased 2 of these for friends BDays..one wanted an LDC..here is a photo of end cap and connector.
-
When I bought my LDC from Rocker1 (David) he made me a custom air stripper that the LDC threads right on to.
-
Wayne, thank you! I will most likely end up ordering one from Rocker1...so much easier to install. Much appreciated Wayne!
-
(https://farm5.staticflickr.com/4212/35604572142_fdd85c47a2_b.jpg)
-
Wayne, thank you for the photos! Rocker1 really makes beautiful carbon fiber LDC’s! Much appreciated again! Happy hunting!
-
A Mk I, but the same basic parts...although the end cap on the Mk. I is longer (the barrel is shorter than the Mk II). Issue end cap is more agressivly ported than this particualr Rocker 1 (wbut you can change that). Actually, by the way that end cap threads on, it tensions the skinny barrel.
(http://i157.photobucket.com/albums/t50/ribbonstone/rocker1/8fd12e99-c555-49fd-b5c7-f9ca84856f72.jpg) (http://s157.photobucket.com/user/ribbonstone/media/rocker1/8fd12e99-c555-49fd-b5c7-f9ca84856f72.jpg.html)
(http://i157.photobucket.com/albums/t50/ribbonstone/air%20pistol/3aada29a-9097-498c-ade7-9dbc8e4f5150.jpg) (http://s157.photobucket.com/user/ribbonstone/media/air%20pistol/3aada29a-9097-498c-ade7-9dbc8e4f5150.jpg.html)
-
Ribbonstone, thank you very very much! So the end cap, the flat round piece with tiny holes with the M8 hole is threaded on and removable from the cylinder body?