GTA
Airguns by Make and Model => Benjamin Airguns => Topic started by: bmoney on May 14, 2018, 11:04:36 AM
-
As some of you may have read I recently got a 760 for my son and the barrel is complete junk, terrible at 10 yards. After my internet research it seems like with these new 760's that crosman barrels are a drop in fit? So if I order a cut and crowned barrel it should drop right in? Thanks.
-
As some of you may have read I recently got a 760 for my son and the barrel is complete junk, terrible at 10 yards. After my internet research it seems like with these new 760's that crosman barrels are a drop in fit? So if I order a cut and crowned barrel it should drop right in? Thanks.
You'll buy the rifled barrel for an m4177, and will have to carefully pull that plastic breech block off the original barrel and press it on to the new rifled barrel.
Btw all crosman 760's made after 1977 will accept this rifled barrel, it's not just for these current guns.
-
Awesome thanks.
-
They work great,but also,they don't come with any sights. I've put scopes on mine. ;D
Um,just realized,Crosman had told me the M4177 was replaced with Mk177-010: and if you need another plastic support the number is 760E125
-
They work great,but also,they don't come with any sights. I've put scopes on mine. ;D
Um,just realized,Crosman had told me the M4177 was replaced with Mk177-010: and if you need another plastic support the number is 760E125
Good info, thanks.