GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Tackleberry on April 25, 2018, 08:26:41 PM
-
I have a very small slow leak in my Disco. It takes about 3 days to drain the 2K psi fill. I checked with a soap solution around the fill port and around the pressure gauge and did not see any bubbles. So I figured instead of doing one o-ring at a time I would replace them all at once. My question is who has the best o-ring kit. I have seen Captain o-ring on eBay and another add for Crosman ring kits.
Who sells a good kit with all of the rings needed. Should I just call Crosman or go with another vendor.
Thank you all for your help in advance
Sincerely
Tackleberry
-
I used the captain ones and it worked good. My leak was from the valve stem though, had to buy a new stem as well before it would hold.
-
Discos r us
-
Discos r us
Excellent thank you, I purchased a few things from him in the past and he was a pleasure to work with, thanks again