GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: horseman76 on April 22, 2018, 11:05:23 PM
-
Hope somebody can help.who makes custom stocks for the prod ,I haven't used this piece for a while ,got it out the other day and found I'd put it away because of the plastic a little advise would be appreciated. Thanks in advance. Wayne
-
Hope somebody can help.who makes custom stocks for the prod ,I haven't used this piece for a while ,got it out the other day and found I'd put it away because of the plastic a little advise would be appreciated. Thanks in advance. Wayne
I can't think of his name (Tom?), but I recall he makes a gorgeous laminated stock for PRods. I remember chatting with him on "hunting gate" last year.
-
I'd love to find a good place to buy the butt stock and fore stock in walnut. Alchemywerks use to have them in unfinished American walnut but not anymore.
-
Found him!
https://www.gatewaytoairguns.org/GTA/index.php?action=profile;u=24739 (https://www.gatewaytoairguns.org/GTA/index.php?action=profile;u=24739)
Here's one of his beauties
(http://i63.tinypic.com/20gk7ip.jpg)
-
Tom West is the guy your looking for he sells these beautiful stocks on eBay I bought one for my DAQ outlaw 58cal pistol I had to open up the channel so it would fit the air tube.
-
Mine in teak wood😎
-
Ken those guys that you're lucky enough to deal with in the Philippines really do a fantastic job.
-
Thanks Wayne. Have two other guns with unique stocks from the Philippines that I’ve yet to show. Stand by😎
-
Thanks Wayne. Have two other guns with unique stocks from the Philippines that I’ve yet to show. Stand by😎
Ken,
Please do not show them to us ..... not all of us are lucky to get them ..... and I know I am very jealous! Wicked looking!!! ::) ;) ;D
Cheers
-
Thanks Wayne. Have two other guns with unique stocks from the Philippines that I’ve yet to show. Stand by😎
Ken,
Please do not show them to us ..... not all of us are lucky to get them ..... and I know I am very jealous! Wicked looking!!! ::) ;) ;D
Cheers
All of us have a common interest. Airguns😎 it’s good to see what other countries such as the Philippines who also have a common interest. Airguns except that they cannot afford a $1000 gun. So they do the best they can by looking a guns on the internet and try to copy them. They have the same passion as we do but their Airguns are custom made and a worker art. Pictures don’t do my guns no justice. Over the next couple weeks I will post some of these wonderful examples of a custom made airgun one with a brass barrel cock type action,a Bullpup stock looks like The Ataman Bullpup, a bench rest gun with two different stocks
-
Thanks Wayne. Have two other guns with unique stocks from the Philippines that I’ve yet to show. Stand by😎
Ken,
Please do not show them to us ..... not all of us are lucky to get them ..... and I know I am very jealous! Wicked looking!!! ::) ;) ;D
+1!
Amen to that-GORGEOUS!!!
Ed
Cheers
-
Found him!
https://www.gatewaytoairguns.org/GTA/index.php?action=profile;u=24739 (https://www.gatewaytoairguns.org/GTA/index.php?action=profile;u=24739)
Here's one of his beauties
(http://i63.tinypic.com/20gk7ip.jpg)
That one's a beauty too! ;) Hate to think what one of 'em costs.............. ???
Ed
-
Don’t be a hater but all my stocks cost me 3500 pesos or $67.00 each in any wood I choose😎
-
Don’t be a hater but all my stocks cost me 3500 pesos or $67.00 each in any wood I choose😎
WOW!!! That's AMAZING! :o Sure wish whomever makes 'em would ship to the States!
Ed
-
Found him!
https://www.gatewaytoairguns.org/GTA/index.php?action=profile;u=24739 (https://www.gatewaytoairguns.org/GTA/index.php?action=profile;u=24739)
Here's one of his beauties
(http://i63.tinypic.com/20gk7ip.jpg)
That one's a beauty too! ;) Hate to think what one of 'em costs.............. ???
Ed
Tom is actually quite reasonable on his prices, you may be surprised!!!
-
I have one of Tom's stocks for prod/1720T. Beautiful piece of furniture for your gun. FWIW: the pistol grip is on the fat side, but you tend to get use to it. I'm always worried I'm going to bang it up while out in the woods.
(http://joefish.homestead.com/GEDC1919.JPG)
-
Very nice John! ;) I did notice that the grip seems to be on the "beefy" side. As you said, I'm sure one gets used to it but I'd like it a little slimmer.........IF I were to get one. Methinks maybe he makes 'em like that for strength. ???
Ed
-
I know of a stock maker who does fantastic work but he does laminates. I have 3 of his stocks but they are for the 10/22..All cnc made and fit and finish is superb. Frankly, I am 100% sure there is no one who will beat his action to stock fit, he is that good. Perhaps he will do it if there is a bunch of orders. Right now, he plans to make stocks for the CZ 455..
I do not know if I am allowed to post PB pics. If not, mods can erase it.
(https://i.imgur.com/b27IjKp.jpg?2)
(https://i.imgur.com/dTha2RR.jpg?2)
(https://i.imgur.com/W1PacNR.jpg?2)
The big ones are BR NightHawk stocks and the burgundy one is a sporter called the Avenger, gents.
He even makes his own acrylic buttpads:
(https://i.imgur.com/zhZdHYI.jpg)
(https://i.imgur.com/7IXpHgA.jpg)
-
Very nice John! ;) I did notice that the grip seems to be on the "beefy" side. As you said, I'm sure one gets used to it but I'd like it a little slimmer.........IF I were to get one. Methinks maybe he makes 'em like that for strength. ???
I have had other stocks that are "fat" there, such as the MDRL bullpup and Boyds Pro-Varmint.
-
I know of a stock maker who does fantastic work but he does laminates. I have 3 of his stocks but they are for the 10/22..All cnc made and fit and finish is superb. Frankly, I am 100% sure there is no one who will beat his action to stock fit, he is that good. Perhaps he will do it if there is a bunch of orders. Right now, he plans to make stocks for the CZ 455..
I do not know if I am allowed to post PB pics. If not, mods can erase it.
(https://i.imgur.com/b27IjKp.jpg?2)
(https://i.imgur.com/dTha2RR.jpg?2)
(https://i.imgur.com/W1PacNR.jpg?2)
The big ones are BR NightHawk stocks and the burgundy one is a sporter called the Avenger, gents.
He even makes his own acrylic buttpads:
(https://i.imgur.com/zhZdHYI.jpg)
(https://i.imgur.com/7IXpHgA.jpg)
Those stock are absolutely beautiful 😳😎👍🏾
-
Indeed, Ken, they are beautiful :D More pics for you to see some of the colors that he has in stock. There are more though but I have no idea of his current inventory. He gets his laminates from a small company who, he said, has the the best made blanks he has ever seen so far.
(https://i.imgur.com/tkKjkVN.jpg)
(https://i.imgur.com/D704sfE.jpg)
(https://i.imgur.com/o7vjXBD.jpg)
(https://i.imgur.com/60T5Vg5.jpg)
(https://i.imgur.com/UwKzwYy.jpg?1)
(https://i.imgur.com/DkE1D04.jpg?1)
(https://i.imgur.com/zfF8ojv.jpg?1)
The gent resides in Rhode Island, btw.
If there is enough interest, I could ask him what the minimum order is. I would buy 1 myself, which would be my 1st airgun in the US! The only problem I see is the template. I mean, who would be willing to send their action to him?
This is the same gent who makes stocks for Joe Chacon, a very well-known rimfire guy.