GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Big Bore AirGun Gate => Topic started by: Guam Airgun Shooter on June 17, 2011, 08:46:08 PM
-
"Barrel Shroud" or "Moderator" for a big bore air rifle, say a .45 cal or bigger? If so, please post results and pics plz. thanks
-
This guy has some experience in big bore ldc's, Neil Clague, he is on page 1 of the yellow classifieds right now.
-
Yep, Neil makes LDC for big bores,....I just got one of his for my .25 Sumatra, and it's a real good piece of equipment,....sure will get one for my bigger bores from him
-
NP,
Anthony Story Makes Custom LDCs That Change The Music Rather Amazing. His Quality is second to none. Here is his
E-Mail if you are interested. He Will send you Pictures of his work so yo can see the Craftsmanship. He is also a Big Bore
Rifle owner with his own needs to keep the Music Down for the neighbors. The custom LDCs Anthony Makes also do not
change the Performance in a negative. Here is Anthony Story E-Mail ( "Anthony Storey" <selectivesalessrvc@sbcglobal.net>)
And this is his Cell # 317-925-5544 . I paid $85 for my Sam Yang 909s and it has changed the Music to Just about 1/2.
His LDCs are a work of art and They look Awesome. These Truthfully make a huge difference. You will see his Products
on the Yellow & American every now and then also. Anthony Reputation is Rock Solid. Anthony Story made a .22 cal LDC
@ 9 1/2" long , It added 7 1/2" OAL To the Rifle. The Outside diameter is 1.25". This one fits my Evanix barrel and has 3
set screws to mount it to the Barrel .I Have it on my Evanix Renegade Carbine. My carbine went from REAL LOUD, To
where I could only hear the hammer open the valve and the pellet hit its Target. My Evanix Renegade Carbine was a really
LOUD Rifle.
Jetman.
-
I did get a few LDCs from Anthony Storey
-
The method in this other post works reasonably well.
http://www.gatewaytoairguns.org/GTA/index.php/topic,12539.msg106398.html#msg106398 (http://www.gatewaytoairguns.org/GTA/index.php/topic,12539.msg106398.html#msg106398)
-
Hi,
http://www.luchtbuks.com/luchtbuks/index.php?page=winkel.php&detail=1377 (http://www.luchtbuks.com/luchtbuks/index.php?page=winkel.php&detail=1377)
I bought this one and used the shell, removed the inside.
I bought spacers at the local shop and metal haircurlers and used the top of the scotsh brite like material.
To prevent the blast damaging the inside i glued the spacers on the haicurlers and made the 3 parts (two normal, one small) that long that the inside is locked tight when the top is screwed on.
I had someone machine a part to make the LDC fit the fire 202s
This makes the fire 202s reasonably quiet. At a shooting range.
I have say that it makes a difference if the pellet fits tight; those are the most silent.
Roundballs .362
regards
-
Thanks all for the info, I contacted Anthony Story. he sent me some pics of some Big LDC, and is currently making one for my .58 cal Haley.. Will post some pics When I get it..
-
Does anyone know the threads on the Dragon claw .50 barrel?
I have tested several but I have not found out what it is?