GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Hobbyman2007 on April 01, 2018, 08:24:27 AM
-
Does anyone know what the tube size is? I’m assuming it’s the same size as the disco but would like to confirm . Looks like a good tinkering rifle . Maybe a regulated bottle fed semi auto good for a couple hundred shots . Perfect for killing cans at the cottage .
-
If I could get mine to stop leaking it would be great for cans.
-
I measured 0.880 OD - same as Maximus/Discovery.
-
Leaking does seem to be a common problem....and they aren't a whole lot of fun to get inside of.
-
can this air tube be used on a Prod ?? ???
-
I've only filled my WF three times - and put it away about two months ago with 1600 PSI in the tube - still at 1600 PSI when the tube was measured for this topic.
-
I've only filled my WF three times - and put it away about two months ago with 1600 PSI in the tube - still at 1600 PSI when the tube was measured for this topic.
your lucky......my grandaughter's lose 900+ psi over night. its been filled about 4 times
also the DA trigger is stiffening up causing blisters on her fingers because it takes her 2 fingers to work the action.
its going back
-
Thanks for the info . I’ll be waiting to get one on sale . It should give me something to tinker with .