GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: immortl on March 29, 2018, 12:56:08 PM

Title: Hammerli 850 screw size?
Post by: immortl on March 29, 2018, 12:56:08 PM

Does anyone know the screw size(s) for the 2 screws that hold the stock to the receiver?  One goes in front of the trigger guard, and the other behind it.

Thanks,
Joe

Title: Re: Hammerli 850 screw size?
Post by: Tucobenedicto on March 29, 2018, 01:48:01 PM

Metric M5X0,8mm pitch,there are two hex nuts in the action you can replace if you cannot find the metrics.

Title: Re: Hammerli 850 screw size?
Post by: immortl on March 30, 2018, 01:04:18 AM

Thanks!  That worked perfectly.  Picked up 2 new screws from the hardware store.