GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: GeraldnGa. on March 18, 2018, 11:11:01 PM
-
The barrel is back on the rifle; finally! In retrospect; I should have sent the rifle back...
The barrel Did look good; after pulling a patch thru it. The disappointment came After pushing a 7.9 then a 10.5 pellet thru [Very Hard to push!] then, looking at the pellets=Looked awful! The crown needed some work, too.
After over 7 1/2 Hours [On the barrel Alone..!] The last pellets that I pushed thru looked ok=I'll find out how it shoots, later.
From empty; I pumped 10 times, and reads about 1500 lbs.
That 's the end of this day; later, Gerald