GTA

All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => Spanish AirGun Gate => Topic started by: Mpac on January 14, 2018, 10:35:46 AM

Title: Norica Black Eagle breakdown
Post by: Mpac on January 14, 2018, 10:35:46 AM

Does have a nick on seal have to wait for new seal to come in. Difference in size height on TF89 to Norica piston. TF89 taller.

Title: Re: Norica Black Eagle breakdown
Post by: bhh on January 14, 2018, 11:49:20 PM

Thanks for the pics. Are the top hat and rear guide steel?

Title: Re: Norica Black Eagle breakdown
Post by: lefteyeshot on January 15, 2018, 12:24:18 AM

I've got a Norica .177 Black Eagle and a .22 Massimo. Both the same gun mechanically as a Norica Marvic or Storm. Just posting to follow this thread.

Title: Re: Norica Black Eagle breakdown
Post by: Lonewolf54 on February 15, 2018, 06:40:33 PM

Quote from: Mpac on January 14, 2018, 10:35:46 AM

Does have a nick on seal have to wait for new seal to come in. Difference in size height on TF89 to Norica piston. TF89 taller.

Where did you purchase your new seal? What is the seal diameter? Is it a 26mm?  I also just purchased a Black Eagle and was planning to take it apart and check the seal. I was hoping to have a new seal in hand before I attempt to tear it down. Any info would be greatly appreciated!!

Title: Re: Norica Black Eagle breakdown
Post by: lefteyeshot on February 15, 2018, 07:08:21 PM

FYI: The top hat in you pic is identical to one I took out of a pawn shop Beeman RS2 i bought for parts.