GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Mosin Marine on December 09, 2017, 01:22:52 PM
-
Its finally on the way, and just as i am starting to finish the basement shooting range.
-
Congratulations! I hope you find it was worth the wait! Tweak the trigger and get a 23ci bottle and you'll be set for a long shooting spell!
-
Congratulations! I hope you find it was worth the wait! Tweak the trigger and get a 23ci bottle and you'll be set for a long shooting spell!
Thank you, i will look into both those mods, were do you get the bottle?
-
I got this one with the 1200 psi regulator:
https://www.aliexpress.com/item/New-Paintball-PCP-Air-Tank-Cyclinder-3000PSI-207BAR-0-38L-HPA-High-Compressed-Air-Bottle-5/32827536794.html?spm=a2g0s.9042311.0.0.E0YkY4 (https://www.aliexpress.com/item/New-Paintball-PCP-Air-Tank-Cyclinder-3000PSI-207BAR-0-38L-HPA-High-Compressed-Air-Bottle-5/32827536794.html?spm=a2g0s.9042311.0.0.E0YkY4)
$40.57 shipped! The only issue with this it the set up of the regulator. The gauge is at a 90 degree angle from the fill port, so to get the forearm on, the fill port has to be at 1200 and the gauge at 1500. The tank can be turned under pressure, so to refill, i have to turn the tank an 1/8th of a turn to gain access to the fill port. I'm looking for an alternative regulator so I don't have to do that, but so far what I have found cost more than the tank/regulator combo I now have! For not it works and has more power than the original tank and a higher shot count!