GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: melloroadman on May 23, 2011, 05:39:49 PM
-
I did a barrel swap on my 201 . I sent the 357 barrel to Will at http://saddlemountaingunsmith.com/ (http://saddlemountaingunsmith.com/) and he did all the modifactions needed to a TOW 25 caliber barrel liner . I then screwed the barrel back on with no other changes being done . I did the testing in doors at our 16 yard range because of the weather . The first two shoots through the barrel left one hole on the target . The remainder of the chrony work showed me that this rifle will do what my 25 condor will do at this range with the same bullets . So I have no dought that it will do what the condor does which is moa at 100 yards . It has more power than my condor and I will be teathering this rifle alot to a 80 cf tank . Happy yes I am . Thanks Will you did a excellent job for me again . He also made a barrel for my 909 which is now a 32 caliber and will be teathered as well . Here is a look at the rifle with a 28 inch 1 in 14 twist 25 barrel .
(http://i301.photobucket.com/albums/nn55/melloroadman/IMG_6814.jpg)
These are the two bullets that I casted my self using 12 bhn lead . The bullets are sized to .2495 .
(http://i301.photobucket.com/albums/nn55/melloroadman/IMG_6659A.jpg)
(http://i301.photobucket.com/albums/nn55/melloroadman/IMG_6643A25252GRAINS.jpg)
Here are the regulated strings I ran today .Marvin
(http://i301.photobucket.com/albums/nn55/melloroadman/25%20CALIBER%20201/IMG_68155-23-1125cal201.jpg)