GTA

Airguns by Make and Model => Hatsan Airguns => Topic started by: 1959 Moggy on July 23, 2017, 05:10:17 PM

Title: 135QE owners
Post by: 1959 Moggy on July 23, 2017, 05:10:17 PM

  I was having a great shooting session with my .30 just now,when my wiggly trigger guard revealed that I have lost the forward trigger guard screw. Anyone here know what size screw I need to replace it?   I won't forget the Loctite,this time.  Thanks in advance....Bryan

Title: Re: 135QE owners
Post by: redtrucker610 on July 24, 2017, 05:57:52 AM

Maybe you could try filling out a Hatsan customer service form on their website? Maybe they will just send you an extra.

Title: Re: 135QE owners
Post by: 1959 Moggy on July 24, 2017, 09:32:39 AM

That's probably the best course of action,unless I simply scrounge around for a similar-sized wood screw.  Thanks...Bryan

Title: Re: 135QE owners
Post by: A.K.A. Tommy Boy on July 24, 2017, 10:06:17 AM

I measured the screw from the Quatro Trigger in my 85 Sniper.

3.5x0.5 mm - metric cap screw
12mm long
The tip of screw has been rounded and polished.
Both forward screws are exactly the same.

I hope this helps.     Best Regards  -  Tom

Title: Re: 135QE owners
Post by: 1959 Moggy on July 24, 2017, 05:27:55 PM

Quote from: T.Wood-68 on July 24, 2017, 10:06:17 AM

I measured the screw from the Quatro Trigger in my 85 Sniper.

3.5x0.5 mm - metric cap screw
12mm long
The tip of screw has been rounded and polished.
Both forward screws are exactly the same.

I hope this helps.     Best Regards  -  Tom

Tom...You bet it helps! Thanks for taking the time to bail me out. .....regards,Bryan