GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: YEMX on July 13, 2017, 10:26:36 PM
-
I tried searching for what I need... I guess my Google Fu isn't as good as I thought.
Is it possible to shorten a Gen2 Mrod tube for use w/a Brod conversion, or would I have to find someone to make me a shorter Mrod tube? I'm hoping to just modify a factory tube.
SECOND QUESTION:
Does anyone know if the MDS Hammer from WAR can be successfully used w/a Cothran Powerhouse valve for a big bore (or at least cast boolits) application?
-
Tom the answer to #2 is yes for #1 talk to Lloyd Sike you can probably have him make you a new tube or for what I think you are trying to do have him machine a Titanium tube to cut weight by about a pound or more. Just saying ;)
-
You can get in contact with Dave at R. Arms Innovations. He made me a Gen 2 tube for a build and last I was in contact with him he had some on hand. And as a bonus he's top notch to deal with.
Chris
-
Tom the answer to #2 is yes for #1 talk to Lloyd Sike you can probably have him make you a new tube or for what I think you are trying to do have him machine a Titanium tube to cut weight by about a pound or more. Just saying ;)
Are there any threads on this? If so, could you please post a link?
Ooooh, A titanium tube would be fancy- but also potentially too rich for my blood... I'm about to (hopefully) purchase a 6mm barrel soon... Besides, I like the extra weight! Marines, we like doing stuff the hard way! ;D
-
;) That's ok Us sailors prefer doing it smart cause it is so much more efficient that way ;D
-
;) That's ok Us sailors prefer doing it smart cause it is so much more efficient that way ;D
;D ;D ;D ;D
This build will be strictly a long range target shooter and varmint gun. So I won't mind the extra weight at all. Mostly shooting from a tripod. Now, carrying said rifle to the shooting sight... Well- I guess I'm a glutton for punishment.
-
You can get in contact with Dave at R. Arms Innovations. He made me a Gen 2 tube for a build and last I was in contact with him he had some on hand. And as a bonus he's top notch to deal with.
Chris
Excellent! I have emailed him- Here I sit waiting with bated breath... I really do hope he has at least one on hand. But if not, no worries. I've got other areas of this build I can work on whilst looking for a Mrod short tube.
-
So, does anyone know if I am able to shorten a Gen2 Mrod tube to 11.75", no problem? Or am I going to run into issues with the hole for the gauge?
I did get a reply back from R. Arms Innovations... I'll go this route if I have to, but he doesn't have any in stock at the moment anyway...
-
So, does anyone know if I am able to shorten a Gen2 Mrod tube to 11.75", no problem? Or am I going to run into issues with the hole for the gauge?
I did get a reply back from R. Arms Innovations... I'll go this route if I have to, but he doesn't have any in stock at the moment anyway...
11.75 is fine and you can send it to me to be shortened and re threaded www.airrifletechnology.com (http://www.airrifletechnology.com) Im in the vendor gate
-
So, does anyone know if I am able to shorten a Gen2 Mrod tube to 11.75", no problem? Or am I going to run into issues with the hole for the gauge?
I did get a reply back from R. Arms Innovations... I'll go this route if I have to, but he doesn't have any in stock at the moment anyway...
11.75 is fine and you can send it to me to be shortened and re threaded www.airrifletechnology.com (http://www.airrifletechnology.com) Im in the vendor gate
Excellent! Thanks Oldpro!!