GTA
Airguns by Make and Model => Hatsan Airguns => Topic started by: nolimit2217 on July 12, 2017, 08:50:14 PM
-
I recently bought the above mentioned rifle and found that the stock is unusable. Where can I find a used or new stock? Or what other rifle stocks would fit the powerline? Thanks in advance all.
-
You will need to double check this but I believe the Turkish Winchester 1000 was made by Hatsan. The Hatsan Mod 70 was the synthetic stock model. I think the wood stock from a Hatsan model 55 will fit. The LOP of the wood stock was about 13-1/2".
So what is it about the stock on yours that makes it unusable?
-
Where the front screw mounts on the left side is cracked all the way through to the point of almost being broken off. Thanks for the info, I will try to find a Hatsan stock then.
-
Contact Hatsan and send a photo of the broken stock. I think it is the same rifle as a Striker 1000S. I had two Strikers with broken stocks and Hatsan upgraded the stocks to wood for only $20 each as a warranty repair.
Good luck!
-
I was able to successfully repair mine. It was broken on both tops of the front mounting screws but not clear to the bottom. Used a piece of 28 ga. aluminum at the top and outside of both sides. Drilled two small holes to mount the aluminum pieces. Countersunk the holes on the inside so the bolts would be flush and not effect the fit. Then used 3 layers of fiberglass on the outside each layer a little longer than the last. Sanded it smooth and painted it. Used blue LocTite on the screws. Looks good. 3 years and going strong.