GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: ezman604 on July 09, 2017, 09:39:20 PM
-
If you own a .177 or .22 Hatsan or Pneuma PCP, please post here with the model and caliber.
So, NO break barrels, only Hatsan/Pneuma NON-SHROUDED PCP airguns qualify for this event. And NONE over .22 caliber!!!!
This is a very special event we need all of the owners to chime in on. We will let this run for 2 weeks and will wrap it up on 23 July at 8pm Central. This will close the same time the current GTA Support Raffle does.
Thanks for posting your Hatsan/Pneuma ownership!!!!
And as always....
SAFE & Happy Shooting!!!!
Dave
8)
-
Proud owner of a AT44-10s .22
-
Hatsan Nova .177
-
At44pa long 177, at44qe long22,at44s 22, at44 tactical 22, gladius long22, alpha youth 177
-
Hatsan AT44 in .177 in the process of becoming a bullpup. Gonna be a beauty.
Chris
-
.22 bullboss,
-
And my "go-to" tree rat assassin is an AT44W-10 in .22cal.
-
Bullboss .22
-
Hatsan AT44-10 QE .22 cal
Cheers,
Rich
-
AT44S QE in .177 and .22. ATP2 QE in .22
-
AT44S-10 in .22
-
i have a hatsan bullboss and love it
-
AT-44 long QE in .22
-
Edge Vortex .22
Model 95 Vortex .22
AT44S-10QE .22
two other Hatsans in .25............
Ed
-
Hammerli Pneuma .22 cal
-
LOL
Hatsan or Pneuma PCP airguns is what this is about, no springers please.
Reponses need to be in this thread, not a reply to the email notification.
-
Bullboss .22
-
I have the .177 single shot Hamerli Pneuma Also the Hatsan AT 44 in .22 cal also single shot
-
2 Hammerli Pnuemas - .177 and .22.
-
Whoops, just saw the PCP bit!
-
AT-44 S-10 Long in .25 cal.... modded to 70 FPE.... Sorry, can't read, apparently.... this was for .177 and .22 cal only.... :-[
Bob
-
Hammerli Pneuma .22
-
I have three accurate reliable shooters from Hatsan, but only one in the asked-for caliber: Pneuma Elite 10 .177
-
.22 Gladius Long and really like it!!
-
AT44W-10 .177
BullBoss .22
BullBoss .177
-
AT-44 S-10 Long in .25 cal.... modded to 70 FPE....
Bob
LOL
.177 or .22cal only...for this event please.
-
AT44 QE Tactical .22 , ATP .177
-
AT44 long .22 cal soon to be converted to .25
-
AT-44 .22
-
AT44 QE .22 short.
-
Hatsan Galatian .177
Hatsan Bullboss .22
-
Hatsan AT44W .22 single shot
-
Hatsan AT44 long in .22 cal.
-
Hatsan BullBoss in 22, and 177. AT44-10 QE long in 22, AT44-10s in 22, At44-10PA in 177, Pneuma in 177, Love those Hatsons.
Jimmy
-
i have a Halestorm 22 cal with a full shroud and an long air tube ' this gun is wood stocked. very quiet gun and deadly accurate
-
I have a AT44S-10 QE .22
-
Hatsan AT44S-10 .177 cal QE
-
Hatsan AT44 -10 .177
-
I have the following; ATP1 .22, AT44S10 .22, AT44W10 .177, AT44W10 .22, Bullmaster .22, Gladius .177. All good guns. Regards, Tom
-
Not sure what this is for, but I do have an AT44 short walnut stock .22
-
I have a Hatsan BT 65 Carnivore .30 caliber with a custom laminate field target stock being finished this month from Woods & Water. Once the stock is completed it will be sent to B. Walton PCP's whom will mount a new Anthlon Midas BTR 4.5x27x50 scope and complete his custom tuning of this rifle. I cannot wait to finally shoot this rifle hopefully around August. I will post pictures on the PCP forum when the rifle is finally shipped back to me!
LOL
This thread is for ONLY .177 & .22cal Hatsan or Pneuma PCP owners ONLY......
I'm glad for the rest of you that have posted owning Hatsan airguns or other calibers. There is a reason and it will be revealed at the conclusion.
But PLEASE only post if you presently own one of those listed in the initial post!!!!!!!!!!!!!!!!!!!!!
-
Owner of a highly modded Bullboss .22 capable of 60fpe! Proud Hatsan tinkerer, and former owner of a AT-44 Long .22 capable of 60+fpe :D
-
I have a Hatsan BT 65 Carnivore .30 caliber with a custom laminate field target stock being finished this month from Woods & Water. Once the stock is completed it will be sent to B. Walton PCP's whom will mount a new Anthlon Midas BTR 4.5x27x50 scope and complete his custom tuning of this rifle. I cannot wait to finally shoot this rifle hopefully around August. I will post pictures on the PCP forum when the rifle is finally shipped back to me!
LOL
This thread is for ONLY .177 & .22cal Hatsan or Pneuma PCP owners ONLY......
I'm glad for the rest of you that have posted owning Hatsan airguns or other calibers. There is a reason and it will be revealed at the conclusion.
But PLEASE only post if you presently own one of those listed in the initial post!!!!!!!!!!!!!!!!!!!!!
Well, at least I got the caliber part right. No, my Hatsan 95 & Edge ain't converted to PCP. :-[
Ed (another dummy that can't read simple instructions) ::)
-
AT44-10 QE .22
-
what kind of contest is this? thanks
-
Gladius .177 qe short
-
Hammerli Pneuma .22 cal 8)
-
Just received my Hatsan AT44S Long QE in .22 cal
-
.22 AT44-PA LONG
.22 BT65
-
Have two Hatsan At44-10's in .22 cal, one with the walnut stock and one with the synthetic thumb hole stock.
Al
-
Hatsan AT44 S10 Long QE in 22 cal.
-
Hatsan BT65 .177
-
Just last week, I got a Hammereli Pneuma Elite 10 .177 as a gift (A GREAT gift).
-
.22 Galatian II with a QE Shroud here.
Ev
-
I have 4 Hatsans, but only two fit your criteria..
AT44S-10 QE .177
AT44S-10 QE .22
-
Hatsan at44 short qe in .22
-
AT44-10 QE Long in .22. Awesome gun!!!
-
AT-4410S Long QE .22 checking in! ;D
-
Hatsan AT 44 S10 long in .22 with thumbhole synthetic stock.
Mike
-
Bullmaster .22 Just put it away for the night, only saw one rat and I didnt get a shot off on it.
-
Regulated Gladius Long in .22
-
Hammerli Pneuma .22
Tom
-
AT44 10 .22, .177 QE, .25 QE.... AT44 10 PA .22... all longs
-
AT 44/10 .22 triggermod
bullboss .25
Peter
-
Hatsan Nova .22
-
Hatsan Galatian .177 smoothe bore
-
At 44 long QE
-
Hatsan AT44S10 TACT QE in .22
Chuck
-
Hatsan Gladius .22 Short
-
AT44S-10 in .22 with a custom stock.
-
AT-44-10 QE in .22. Love it.
-
A Hatsan AT 44 22 cal. with wood stock.Love it.
-
AT44-Long in 22cal
-
Hatsan at44 w10 in 22 cal
-
AT44-10 QE in .22
mod25 supertact in .177
-
Galatian II in .177
Galatian IV in .177
Both standard barrel with threaded cap, not QE.
-
Hatsan AT44-10 Tactical .22
-
Gladius in.22 great bullpup
-
Dang I forgot one , AT44 PA .177 ::) so many hatsans so little memory.
-
I have Hatsan AT44S-10 QE in .177
-
I have a 22 AT44QE tactical.
Jim
-
I have the very heavy Hatsan Gladius in 22 caliber
-
I have an love my AT-44 long QE in .22
-
Hatson AT44s QE .22
-
at44 long .22 (its a workhorse!)
-
Hey proud owner of those following Hatsan:
Pistol ATP2 .22 caliber
Hatsan AT44 .22 caliber
-
Hatsan Bullmaster
-
1) hammerli pneuma .22 here as well.
-
Interesting that soo many of us are over the moon with our Hatsan PCPs, wow!
I remember when Hatsans got little-to-no-love at all, and the name itself could be used by springer snobs as a pejorative, ha ha! Yes, I was one such snob, but hey, my experiences with them in the past were not impressive at all, sooo, yeah, I was a hater, too, I gotta confess, lol..
Buuut, these newer PCPs, wow, I am now a believer in Turkish Delights!!
Prolly try one of their big ol' springer cannons, sooner or later, just to update my opinions on them, too. I like to be pleasantly surprised by exceeded expectations whenever possible, for sure!!
Sorry to go off-topic, but wow, what a platform!
:-) Chickie
-
Hatsan AT44 S .22 caliber
-
Bullboss .22
-
I have a at44 bullpub .22cal really a good shooting gun.
-
AT44 Long QE .22 (The Grin Maker) ;)
-
AT44 10 Tactical .22 Non-QE version
-
Hammerli/Pneuma .177
-
AT44-10QE long in .22 cal
-
AT44-10s .22 with bullpup stock and huma regulator.
-
Have the Hatsan Gladius 22 caliber
-
AT44-10S .25
AT44-10S .177
AT44-10QE Tact .22
-
I only have one air rifle and it is a Hasan Bullboss in .22 cal.
-
AT44-10 .177 caliber -> ;)
-
Have a Hatsan AT44-10W QE love it
-
I have the Hatsun AT 44-10 Long QE, 22 cal. PCP.
Barry
-
And my "go-to" tree rat assassin is an AT44W-10 in .22cal.
got the exact same one! Tuned and it is an assasin
-
Hatsan AT44-10, 177
-
At44 tactical QE in 22
-
Darn, this is proving to be a bit difficult.
:)
Trying to keep it a mystery but simplified.
QE models are disqualified due to the shroud.
Has to be a Hatsan/Pneuma in .177/.22 caliber PCP with NO shroud.
Bear with me, it's neat for those that qualify. My apologies for not posting it 100% correctly from the beginning!!!!
So, NO break barrels, only NON-QE .177/.22cal models of Hatsan/Pneuma PCP airguns qualify for this event. NONE over .22 caliber please!!!!
-
Ok at44s 22, at44 pa long 177, at44 tactical 22
-
i own a hatsan at44 short
-
i own a hatsan at44 short
-
AT44 QE Long .22 ;)
-
4 Hatsan AT-44's Here!!!,.
1) .22 Hatsan AT-44"Pump/Action"
2) .22 Hatsan AT-44"tact"10-22
3).22 Hatsan AT-44S(Single Shot)
4).25 Hatsan AT-44W(Single Shot)
Cheer's & Thank's, Andy.
-
AT44-10. Wood stock non QE. Great gun.
-
Galatian II and Nova. Removed the QE shroud and put screw on LDCs on both.
-
I guess my 22 & 177 Bullbosses are out - QE models. My AT44-10 177 is pre -QE got in trade with Extreme .457. Thanks again Chacho!
Dave
-
Love my At44pa long .22
-
.22 Hatsan Bullmaster semi auto
.22 Bull Boss Long QE
.22 AT44-10 Long
-
AT44-10W .22 cal
Bullboss .177 on the way.
-
Hatsan .22, Vortex Quattro Trigger
NOT a PCP.
:)
-
Hatsan AT4410QE .22
-
Hammerli pneuma elite 10 .22 cal no mods all stock other than wolf silencer.
-
Edge .22 8)
-
AT44 short
1. 22 wood
2. 177 synthetic
-
Hatsan AT 44 10 synthetic in .22 with Factory Silencer and Nikko Sterling 1/2 mildot scope.
-
Just 5 days remaining on this little event.
Be sure to post your Hatsan/Pneuma .177/.22cal PCP NON- QE version ownership here.
-
Count me in. I just ordered a Hatsan Gladius in .22 since I had a "bargain gate" extra BSA 3-12 scope that would have been lonely without a gun..... All you fellers should be ashamed for enabling my habit ;D
-
Welcome to the dark side john😎
-
I can take the shroud off my Bullboss, if it lets me win something,lol!
-
This little event turned out to be tough. LOL
Thanks to all that participated. What we were looking for are Hatsan/Hammerli Pneuma owners of .177/.22cal PCP that have no shroud and not the QE version.
Our own Neil Clague is always creating and experimenting. He has a new prototype LDC to fit these specific airguns and has offered one up for us to give away.
AWESOME!!!!
What I did was take the number of posts in this thread (127 total) and punched in 1-127 in a random number generator. The number it spit out would be the reply number that wins the neat new item. So, the number that the generator spit out was 46 which is the reply posted by Elroy1. Congrats Ernie for the win of a fantastic item. MANY thanks to Neil for the generous donation.
Ernie, drop me a message with your contact info and I'll forward it to Neil.
Thanks again all and I hope we can have more giveaways in the near future!!!
-
That's pretty kool. Thanks Neil!
I hope all the non-qualifiers were edited out.
-
Non-qualifiers were eliminated.
:)
-
Congrats Ernie! Nice giveaway Dave.
-
Congrats Ernie! ;)
Ed
-
I want to see pictures!
-
I want to see pictures!
If you are not familiar with Neil's work, take a look at the photos here.
http://petersoncorner.com/clague/gallery.htm (http://petersoncorner.com/clague/gallery.htm)
-
I am familiar, but I wanted to see pictures of the happy winner with his new toy on his gun :)
-
LOL
Me too....but first I need the winner to contact me. Sent pm today and no reply. I may wind up making another selection.
Will give him till this coming Monday 31 July to contact me.
-
I can take the shroud off my Bullboss, if it lets me win something,lol!
Well Donny, guess what. You got your wish. I waited I think long enough and sent a pm to Ernie and no response. So...I let the generator crank out another random number. And it picked #127, which is Rallyshark. Send me your complete mailing address and if you have a threaded end after removing the shroud, congrats.
:)
-
Done!!! Check your messages :) I'll even post a picture when I get it!
-
I am a man of my word, so here are some pictures of the the de-shrouded Bullboss with it's nice new Neil Clague LDC mounted. On a side note, the gun is only about 7/8" longer than with the QE, and there is certainly a volume increase. There is also a slight weight decrease I think too. First of all, the fit and finish of the LDC are top notch and I really like the paint/coating on it! My gun is pretty darn quiet anyway(well tuned), but I did a few quick shots, and I believe it is even quieter :)
I will give a full review, by the end of the weekend I hope. I want to be able to really shoot it at all power levels and tunes and at targets, so I can give a proper review. Anywho, here's some pictures! I have one with the QE still on the gun, and one with the NC LDC. Then one with the LDC beside the QE for a size comparison(gained some volume, so that is good). Also, the Bullboss is wearing it's shorty cylinder in these pictures, except for the last one with the size comparison(has the long cylinder on that one). Oh, and please excuse the dirty gun. More to come!
-
Wow...looks good Donny. Thanks for posting the photos and for the follow up. Thanks again Neil.
Can't wait to hear more.
-
I just got a Pneuma .22!!!
Wait....I'm.... late??!!!
-
I just got a Pneuma .22!!!
Wait....I'm.... late??!!!
Are you bringing to the HH fun shoot? We can have a dueling Pneuma's paintball match. Pneuma's only.
-
I just got a Pneuma .22!!!
Wait....I'm.... late??!!!
Are you bringing to the HH fun shoot? We can have a dueling Pneuma's paintball match. Pneuma's only.
Don't know yet. I hope to. I plan on being there, just don't know if that particular gun will be.
-
Okay guys, here's the review I just posted on the Neil Clague LDC, enjoy! I know I am :D
https://www.gatewaytoairguns.org/GTA/index.php?topic=130596.new#new (https://www.gatewaytoairguns.org/GTA/index.php?topic=130596.new#new)
-
Okay guys, here's the review I just posted on the Neil Clague LDC, enjoy! I know I am :D
https://www.gatewaytoairguns.org/GTA/index.php?topic=130596.new#new (https://www.gatewaytoairguns.org/GTA/index.php?topic=130596.new#new)
Thanks for the review Donny.
-
Hatsan At 44-10 qe 22 cal. converted to bullpup with craftsman vit kit.
-
Hatsan 22 Bullboss