GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: ninsei on June 21, 2017, 11:43:55 PM

Title: Anyone know the gauge thread size of the Benjamin HPP2KU pump ?
Post by: ninsei on June 21, 2017, 11:43:55 PM

Looking to replace the gauge for my Benjamin HPP2KU pump with a higher quality one.

Title: Re: Anyone know the gauge thread size of the Benjamin HPP2KU pump ?
Post by: mann on June 23, 2017, 05:46:14 PM

Are u talking about the hose thread on the bottom? The hose thread on bottom is 1/8 pipe I believe

Title: Re: Anyone know the gauge thread size of the Benjamin HPP2KU pump ?
Post by: ninsei on June 23, 2017, 07:12:03 PM

No the gauge thread.  Seems to be 1/8 NPT.  Need to replace the gauge.  There was a big one on there I'm thinking I'll just replace it with the smaller 1 inch diameter gauges found on guns like the Disco.

Title: Re: Anyone know the gauge thread size of the Benjamin HPP2KU pump ?
Post by: nervoustrigger on June 23, 2017, 07:23:46 PM

Yes, the gauge is 1/8" NPT.

Get a quality one with a decent size dial so you have good resolution.  The gauges on many guns are not that good so don't you want at least one gauge you can trust?