GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: bandg on June 15, 2017, 05:07:11 PM
-
M10 and Varmint pr900 Schematic below-I contacted SPA about parts for the Varmint, M10, and pp700 and they sent diagrams. Their response was that parts for these guns are available. They stated an order should be put together with part numbers/description with shipping address and they would send shipping amount and payment information.
-
Is your schematic different from the one than the one in the M10 "Technical Reference" I started? If so let me know, I will update with yours. Some guys may not know that I started a community-supported M10 "book" and try to add relevant build/tune information as it comes along. Other folks have to do the work because I'm not smart enough, but I at least try to keep a centralized resource. It's at https://dl.dropboxusercontent.com/u/17663928/M10%20technical%20reference.pdf
I just saw a thread on adding a mag to the M10. If enough details follow in a how-to, I will add it as well (with original how-to authors permission )
-
It is different but I don't know that it's any better. Could be that it is the most current information they use on their end. Might be worthwhile having both in the content you've already assembled which is excellent.