GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Big Bore AirGun Gate => Topic started by: Gary on May 15, 2011, 03:32:04 PM

Title: Dragon Slayer 50?
Post by: Gary on May 15, 2011, 03:32:04 PM

Does anyone have or know where to get a parts diagram? Not needed now but someday there is no doubt it will need some work and I am like the Boy Scouts. "Always Be Prepared."
Thanks
Gary

Title: Re: Dragon Slayer 50?
Post by: bluzjamer on May 18, 2011, 01:22:56 AM

This is all I have...no diagram.
https://www.pyramydair.com/manual/career/-dragon-manual/ (https://www.pyramydair.com/manual/career/-dragon-manual/)

Bob

Title: Re: Dragon Slayer 50?
Post by: Gary on May 18, 2011, 08:13:08 PM

Thanks Bob that is all I could find on this rifle to. It's hard to belive that there is almost no info on this beast.
Gary

Title: Re: Dragon Slayer 50?
Post by: jetmangd on May 18, 2011, 08:35:47 PM

 Here is the E-Mail to Shin Sung Company in Korea ( shinsung@shinsungrifle.com <shinsung@shinsungrifle.com> ) And there
 website. You may be able to get information from the Company, You have nothing to loose by giving it a try. There is very
 limited information on these Korean Air Guns, And some of the information is written rather poor at that. My Sam Yang 909s
 is also another Air Rifle with limited to no Information. Its worth a Shot.



                                              http://www.shinsungrifle.com/html/eng/main.htm (http://www.shinsungrifle.com/html/eng/main.htm)                   
                                                                         

                                                                   Jetman

Title: Re: Dragon Slayer 50?
Post by: Gary on May 18, 2011, 10:18:26 PM

Thanks Gary.
I will shoot them an email and see what they answer with.
Gary

Title: Re: Dragon Slayer 50?
Post by: jetmangd on May 19, 2011, 05:22:58 AM

Gary,
        Cool Deal , I hope the Shin Sung site or E-Mail works. I would only have to think that Shin Sung would be willing to give
        any and all information on there very popular Air Rifles.






                                                                Jetman / Gary

Title: Re: Dragon Slayer 50?
Post by: woodland on May 26, 2011, 12:59:13 PM

My dear Friends,

Put this one in your favorites.....  we have a mutual friend

http://airenlaces.blogspot.com/p/span-stylecolor-black-font-family.html (http://airenlaces.blogspot.com/p/span-stylecolor-black-font-family.html)

under Shinsung

and this one as well............

http://airenlaces.blogspot.com/p/continuacion-mas-de-275-enlaces-con.html (http://airenlaces.blogspot.com/p/continuacion-mas-de-275-enlaces-con.html)

good luck

Your truely ;D

Title: Re: Dragon Slayer 50?
Post by: Gary on May 26, 2011, 02:20:41 PM

Thank you sir you are a gentleman. I have looked high and low for a picture of the parts diagram and came up with nada.

Thanks again
Gary

Title: Re: Dragon Slayer 50?
Post by: bluzjamer on May 26, 2011, 03:08:28 PM

I tried to pull up the DS and no luck. Could not open the file, I even registered.

Title: Re: Dragon Slayer 50?
Post by: Gary on May 27, 2011, 01:13:25 AM

Guys I recived the diagram tonight from Shin Sung. If anyone needs a print of the Dragon Slayer 50 send me an email with Dragon Slayer in the subject line. No part numbers but a good pic.
Gary

Title: Re: Dragon Slayer 50?
Post by: woodland on May 27, 2011, 07:17:11 AM

Hi,

The file didn't work?

I saved mine in pdf and have it on my pc...

The second link i gave is very useful for getting things apart.

I can't garantee that some things behind the links have gone...
That happens all the time with pictures;  "this picture has been removed"  in articles
pitty

regards
Woodland

Title: Re: Dragon Slayer 50?
Post by: bluzjamer on May 28, 2011, 03:24:30 PM

Thanks Gary and Woodland