GTA
All Springer/NP/PCP Air Gun Discussion General => Air Gun Gate => Topic started by: screaminjlew on March 27, 2017, 09:17:00 PM
-
I am trying to pull a jag from the breach end on the barrel but, I am having problems with not enough room to fit the flexible pull cable with the jag holder. What have others used to xlean the barrel on there under lever guns? I don't want to push the jag from the muzzzle end. Any help is greatly appreciated thanks, Jeff
-
I'm using one of these.
You stick it in from the muzzle.
(http://www.topairgun.com/files/2019619/uploaded/CrownSaver2-72.gif)
-
I just used my .22 cleaning rod with the loop attachment and cotton patches. I soaked one in Goo Gone and ran it up and down the barrel, then ran clean patches through it till them came out clean. I did all this from the end of the barrel, but it's easy with the stiff rod. Those flexible ones are tough when you don't have clear access to both ends of the barrel.
-
I'm using one of these.
You stick it in from the muzzle.
(http://www.topairgun.com/files/2019619/uploaded/CrownSaver2-72.gif)
Where can i find one of those at online?
Thanks Jeff
-
Mac1 Airguns in Gardena ,CA
https://www.mac1airgunshop.com/jl-crown-saver-p/jlcs.htm (https://www.mac1airgunshop.com/jl-crown-saver-p/jlcs.htm)