GTA
Airguns by Make and Model => Evanix Airguns => Topic started by: Jon Hutty on March 13, 2017, 11:45:03 PM
-
Hi all I am after some advice from you guys has I have played around with a lot of my pcps and modded them but would like to hear from you guys the pros on how to tune my rifle correctly to get the best from it has its not bad, but know could be alot better, i'e shot to shot consistency and accuracy. With my air arms I had too adjust the hammer spring and transfer port and I polished the hammer but with the Noblesse I am kind of lost has I cannot find no transfer port the only adjustment I kind find is the hammer spring. But that seems to go all against what I have learned since starting is you normally have the 2 synchronized adjustments with the hammer spring and transfer port. For the best shot to shot accuracy power and shot count. So I would like some advice from you guys if I'm missing something, where there is a transfer port on the Noblesse or in fact it is just the hammer spring and polishing of the hammer. Also I am looking to see if someone has a factory stock hammer spring for my rifle what i could purchase, i asked someone on a forum when i first got my noblesse best way to reduce my rifle down from 960 fps and they told me chop the hammer spring in half, with me been new to the pcp seen, at the time before learning what i know now, bleeding did it like an idiot. Where if i new what i know now could of just adjusted the hammer adjuster to get the lesser power. But has you guys know you learn from your mistakes. So if anyone on the forum could assist or give me some pointers i would be truly greatfull thx.
-
Hi Jon Welcome;The Guy to talk to is Baxter Walton on here. He ownes one and Tunes them and makes LDCs for them, He's a good Guy And heard nothing but Good Words about His Work His Quiters work the Treet (a little Brit lingo).....Franky BWaltonPCP.com
-
BWalton PCPS great LDC, tunes and knowledge of Turkish Airgun (Carnivores)
At the moment he is tuning my Evanix RS2 .30 building an LDC for her too. I have LDC on my Sumatra.22-.25 Carbines from Baxter they work GREAT!!!!!!!!! I purchased a Kral Puncher Bull Pup .22 from Baxter also. My Kral will be tuned and an LDC will be built for it too. Check with Baxter for your Airgun purchases. His website is www.bwaltonpcp.com (http://www.bwaltonpcp.com) tel (805) 207-5538
Give Baxter a call
-
Hey Jon, Keep use posted on your Krosa. I have the same gun, and I started to tinker with it and now it shoots like $&!#. All I did was cut a 1\2 coil off the spring and added a reg. All my other guns that I tinker with shoot fine, But this Krosa seems to not like me. Good Luck
-
I bought mine last year and I decided not to tinker with it.
-
Richard, I have been looking for a Krosa for a while now but it seems that no one in US is selling it. Could you let me know if anyone in the states is selling JKHAN Krosa. Thanks
-
Richard, I have been looking for a Krosa for a while now but it seems that no one in US is selling it. Could you let me know if anyone in the states is selling JKHAN Krosa. Thanks
Contact rlairgunsupply they sell JKHan.