GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: FuzzyGrub on March 03, 2017, 04:45:57 PM
-
I noticed it today, but it has probably been out for a while. Not sure what I'd do with any of those parts, but was wondering if crosman even sold them. The prior 357 version, you couldn't get the parts. Anyone try ordering any?
https://support.crosman.com/hc/en-us/article_attachments/203638306/BPBD3SRT_EVP.PDF (https://support.crosman.com/hc/en-us/article_attachments/203638306/BPBD3SRT_EVP.PDF)
-
I have several times.
-
I have several times.
Thx, just curious, do you know the OD of the barrel?
-
I've been thinking of doing a custom build on the bulldog, glad to see they have released the schematic.
-
I've been thinking of doing a custom build on the bulldog, glad to see they have released the schematic.
I'd be interested in hearing what you're thinking. ;)
On my next parts order, will have to get some prices on some of the bulldog parts.
-
I'd be interested in hearing what you're thinking. ;)
On my next parts order, will have to get some prices on some of the bulldog parts.
I've been trying to find a high power, inexpensive platform to build a small bore bullet shooting long range gun.
And being a Crosman dealer and service station they offer the most value if I can make it work.
And the bulldog is already a side-lever so cocking won't be extremely difficult with heavy springs, its a repeater made
for bigbore so it may be possible to retrofit the mags and with some porting I've seen reports of 200fpe.
So if I can rebarrel it to either .22 and .25 for swaged slugs or .257 I think it could work, it has a decent sized airtube...
I'm not sure if I would keep it a bullpup, it has the benefit of size efficiency allowing for a long barrel which
seems to be important on high power smallbores since they have less surface to push you can get back some of that velocity with a long barrel.
I have to check and see what the barrel dimensions are on the bulldog, but I think it would be a fun project.
thoughts are welcome but it I've been looking for a project to do some airgun modding of my own and for myself ;)
-
Keep me posted. :) I no fan of that plastic shell of a stock. Seems way to much like a cheap airsoft gun.
-
looked for this the other day with no luck,, wonder what barrel price is..my guess is 180-200 bux..
-
looked for this the other day with no luck,, wonder what barrel price is..my guess is 180-200 bux..
I haven't check yet but knowing Crosman and Benjamin part prices, I would guess more in the $80-125 range
but the bulldog is a bit different from their other rifles.
-
I would usually think the same , but im sure they outsourced the barrel .. And if the barrel is that cheap , ill just buy an entire bulldog from the parts diagram and maybe get it for 400 ish ?? lol
-
The barrel is .625" at the muzzel but at the breach is tapers up some. Not sure exact size but i think its .875.
I've been doing a custom build on the bulldog and will be releasing tech videos and regulators and reservoir extensions. Even been thinking about the barrel conversion. I think that platform would be awesome in .308, .264 or .257
I've already released an LDC. https://youtu.be/R0XZ9-Ak7WU and a single shot tray.
-
I'm calling mine the Pitbull