GTA

Airguns by Make and Model => Diana Airguns => Topic started by: shiyfire on May 03, 2011, 09:59:57 PM

Title: RWS 350 -T05 TRIGGER SPRING SWAP
Post by: shiyfire on May 03, 2011, 09:59:57 PM

I took mine apart today and replaced the small one under the sear with a ink pen spring and it feels great. Is this a common fix for these triggers?Does this make it un-safe?

Title: Re: RWS 350 -T05 TRIGGER SPRING SWAP
Post by: Mark 611 on May 03, 2011, 10:25:08 PM

MMMMM! good question, even tho I've done a similar spring swap, I think as long as you don't use a heavier piston spring you should be ok, what will happen is if its to light the barrel lock up won't hold and or you could get a fire off unexpectedly due to the spring not being able to hold the pressure of the main spring for the piston

Title: Re: RWS 350 -T05 TRIGGER SPRING SWAP
Post by: JimL911 on May 03, 2011, 10:28:06 PM

Lots of people change out the spring. Here is a proper replacement.
http://www1.mscdirect.com/CGI/NNSRIT2?PMPXNO=3348059&PMTERM=00612648 (http://www1.mscdirect.com/CGI/NNSRIT2?PMPXNO=3348059&PMTERM=00612648)

Title: Re: RWS 350 -T05 TRIGGER SPRING SWAP
Post by: Rob Hawkins on May 09, 2011, 10:09:03 PM

I like this one better.
http://www1.mscdirect.com/CGI/NNSRIT2?PMPXNO=2709842&PMT4NO=0 (http://www1.mscdirect.com/CGI/NNSRIT2?PMPXNO=2709842&PMT4NO=0)
Rob