GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: skorec on February 19, 2017, 11:48:55 AM
-
My Qb78/177/HPA shoot 6 pellets by use only their own air tube ( 1500-1000 PSI ).
6 shoots is enough for me for a weak .
To reach stable FPS I am thinking only insert some 4500 PSI additional tube with air regulator direct inside/into original tube. Eventually the final tube can be max 20cm longer.
Can you advice me the regulator and tube ?
-
Sounds like a VERY bad idea to me! The tube would have to be quite thin to fit into the 78 air tube. If the regulator were to fail, it would expose the QB tube and valve to the 4500 psi. A much better idea would be to get a tank block, and a Ninja 1100 psi regulated 13 cubic inch tank. Dozens of shots per fill, and with the 1800 psi burst disk on the low side of the regulator, MUCH safer!
-
VERY sorry for this bad idea. :'(
I want to ask moderator to delete this thread.
-
yep, simple regged tank, less stuff to leak and safer.. Qb has just come out with a regged pcp,i forget the name
-
did you mean ?
http://www.gatewaytoairguns.org/GTA/index.php?topic=120096.0 (http://www.gatewaytoairguns.org/GTA/index.php?topic=120096.0)
-
theres that and another one for 200 that not regged.. looks like a discovery tube
http://www.network54.com/Forum/113813/message/1487037643/The+New+Beeman+Chief+PCP+Air+Rifle (http://www.network54.com/Forum/113813/message/1487037643/The+New+Beeman+Chief+PCP+Air+Rifle)