GTA

Support Equipment For PCP/HPA/CO2 and springers ,rams => Support Equipment For PCP/HPA/CO2 => Topic started by: oldpro on January 12, 2017, 08:41:25 PM

Title: AirVenturi New Compressor
Post by: oldpro on January 12, 2017, 08:41:25 PM
 anyone know anything about this http://www.airventuri.com/compressor?utm_source=Air+Venturi+4500+Air+Compressor+Dealer+Awareness+Email&utm_campaign=Compressor-dealer-awareness-email&utm_medium=email (http://www.airventuri.com/compressor?utm_source=Air+Venturi+4500+Air+Compressor+Dealer+Awareness+Email&utm_campaign=Compressor-dealer-awareness-email&utm_medium=email)
Title: Re: AirVenturi New Compressor
Post by: Berky on January 12, 2017, 08:48:17 PM
Nope..but phone calls in order. Impressive fill rate. We shall se.
Title: Re: AirVenturi New Compressor
Post by: oldpro on January 12, 2017, 08:59:42 PM
Im and AirVenturi dealer so Ill call tomorrow and get the questions rolling but I do see its a oil bath and that worries me.
Title: Re: AirVenturi New Compressor
Post by: Berky on January 12, 2017, 09:55:07 PM
You would think Air Venturi did the home work before going all in on it. I'll wait for your report.
Title: Re: AirVenturi New Compressor
Post by: oldpro on January 12, 2017, 10:04:58 PM
 I sure hope so. Ill get all the info I can tomorrow.
Title: Re: AirVenturi New Compressor
Post by: blackdiesel on January 12, 2017, 10:24:26 PM
Look like the latest offering of Mrodair.

(http://mrodair.com/yahoo_site_admin/assets/images/first_photo.283112056_std.JPG)

(http://mrodair.com/yahoo_site_admin/assets/images/cylinders.283105742_std.JPG)
Title: Re: AirVenturi New Compressor
Post by: aceflier on January 12, 2017, 10:29:53 PM
I'm afraid to ask how much? $$$
Title: Re: AirVenturi New Compressor
Post by: oldpro on January 12, 2017, 10:52:14 PM
Look like the latest offering of Mrodair.

(http://mrodair.com/yahoo_site_admin/assets/images/first_photo.283112056_std.JPG)

(http://mrodair.com/yahoo_site_admin/assets/images/cylinders.283105742_std.JPG)
Thats what Im afraid of! I sure hope not.
Title: Re: AirVenturi New Compressor
Post by: ShawninIL on January 12, 2017, 11:12:32 PM
I think I'll stick with my Air Charger
Title: Re: AirVenturi New Compressor
Post by: oldpro on January 12, 2017, 11:14:22 PM
I think I'll stick with my Air Charger
You cant go wrong with the air charger best SO FAR compressor for the money out there.
Title: Re: AirVenturi New Compressor
Post by: ShawninIL on January 12, 2017, 11:17:49 PM
Love mine. I did some of Motorheads mods and so far it has been pretty sweet
Title: Re: AirVenturi New Compressor
Post by: oldpro on January 12, 2017, 11:25:06 PM
 Shawn I know a guy who I trust as to being truthful and he has a hour meter on his supercharger and he claims he has 5000 hours on it with no rebuild!!!!
Title: Re: AirVenturi New Compressor
Post by: farmerjoe99 on January 12, 2017, 11:29:12 PM
Yea I'm excited to learn more on this compressor I'll looks it up but I think someone in the know
at airventuri or PA posted and said its not the same as the mrodair one but I'll have to check.

Another one I just read about that I'm gonna do some research on is the Carette 4500 compressor
I haven't gotten to read it yet but there is a long write up on TAG about it looks promising from the first few paragraphs.
http://www.talonairgun.com/forum/viewtopic.php?t=35990 (http://www.talonairgun.com/forum/viewtopic.php?t=35990)
Title: Re: AirVenturi New Compressor
Post by: farmerjoe99 on January 12, 2017, 11:30:17 PM
Found it it was Tyler:
Quote
Just to quell it now,

NOT the same as the Mrod Air compressor.  Not the same manufacturer.  But these things do always look somewhat similar...so I can understand the confusion.

I can't tell you guys too much just yet, but I have tested this unit personally and am very impressed with it. There will certainly be more to come. 

Like I said, can't say too much, but I will answer what I can for those that have questions.

Tyler

http://www.gatewaytoairguns.org/GTA/index.php?topic=117661.msg1132412#msg1132412 (http://www.gatewaytoairguns.org/GTA/index.php?topic=117661.msg1132412#msg1132412)

Quote
Quote from: 45Bravo on November 21, 2016, 10:44:39 PM
Ok Tyler, I will take you up on that.
Not too many questions, but 2 BIG ONES.

I am going to say it's water cooled is a given.

The two questions:

Is the compressor Oil filled, or oilless?

Are there driers/separators in the line?

That should answer a lot of the questions, without letting too much info out..

Thank you in advance for your time and consideration in these topics.

Ian

P.s. I think the answers are going to be
yes on oil filled,
And 1 separator inline..

Yes, they are oil filled.  It's a relatively small amount and they are emptied at the factory before shipping.  Oil Changes are quick and easy.

And yes, there is one oil filter inline.  Also, very easy to replace when necessary. 

And yes, water cooled as well. 

Quote from: StevenG on November 22, 2016, 08:21:14 AM
Assuming there is a separator is there any problem with an oil filled compressor being used?
We need low oil, but we won't be breathing it so it does not have to be 100% free.

I agree with you Steven.  We use a NARDI compressor here and even it takes oil....it's hard to escape.  And to your point....this new compressor (or most of the compressors you'd purchase for Air gun use) is NOT for breathing air.
Title: Re: AirVenturi New Compressor
Post by: Berky on January 17, 2017, 06:58:47 PM
Any new info on the Air Venturi unit?
Title: Re: AirVenturi New Compressor
Post by: bnowlin on January 17, 2017, 09:55:09 PM
anyone know anything about this http://www.airventuri.com/compressor?utm_source=Air+Venturi+4500+Air+Compressor+Dealer+Awareness+Email&utm_campaign=Compressor-dealer-awareness-email&utm_medium=email (http://www.airventuri.com/compressor?utm_source=Air+Venturi+4500+Air+Compressor+Dealer+Awareness+Email&utm_campaign=Compressor-dealer-awareness-email&utm_medium=email)

Travis the manual is on their site if it is not the same comp then it was built by the same people and needs 5w40 or comp oil.
Bob
Title: Re: AirVenturi New Compressor
Post by: Old Corps on January 17, 2017, 11:11:47 PM
http://hardairmagazine.com/news/new-4500-psi-air-venturi-air-compressor-lets-fill-pcp-airguns-home/ (http://hardairmagazine.com/news/new-4500-psi-air-venturi-air-compressor-lets-fill-pcp-airguns-home/)

Yer welcome!

Ed
Title: Re: AirVenturi New Compressor
Post by: oldpro on January 17, 2017, 11:44:14 PM
 I called but everyone is at theshot show so no new info till next week gang. I will ask the right questions believe me.
Title: Re: AirVenturi New Compressor
Post by: MJP on January 18, 2017, 01:33:17 AM
Took a look at the manual, looks just the same as nimrodair &^^&, just a different package and bigger separator.
I wouldn't even consider that one over the reliable options we have at that price range.

Marko
Title: Re: AirVenturi New Compressor
Post by: oldpro on January 18, 2017, 01:48:14 AM
 Sure looks like the same POS Mrod air compressor http://www.airventuri.com/site/manuals/ (http://www.airventuri.com/site/manuals/) I sure hope they did something about the piston rings.......I sure hope it has some serious internal upgrades and oil stripper.
Title: Re: AirVenturi New Compressor
Post by: KnifeMaker on January 18, 2017, 07:14:08 AM
Travis, All high pressure air compressors are oil bath. Bauer, Nardi. Tex, All of them. It's how they handle the oil that is important.
This is not the same compressor that Mrodair had been selling, however, the one pictured on this thread is not the one he has been selling either.

He may very well have picked this one up! Not many people that we would talk to would know if he just picked them up. ;)

Knife
Title: Re: AirVenturi New Compressor
Post by: Berky on January 24, 2017, 08:42:37 PM
I see PA is advertising them now