GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: fritzalee on November 08, 2016, 09:31:35 AM

Title: Hammerli AR20ft High pressure regulator
Post by: fritzalee on November 08, 2016, 09:31:35 AM

I had to replace an Oring in my AR20ft regulator P/N 466.62 (20J), and dropped it, Belleville springs everywhere, not even sure I found them all. Can some one help me with the arrangement of these spring washers, and possably the Belleville washer size.
Fred Voisen

Title: Re: Hammerli AR20ft High pressure regulator
Post by: Mont on November 08, 2016, 03:33:31 PM

I don't what regulator you have.  If it's a lane there a parts break down on there web site.  You could also look a there in stall guide, in it is a expiation of the washers and there pattern for the psi range you need.
Good luck Joe